Rosco Quick Color Sleeve User Manual

PRODUCT DESCRIPTION

Rosco Quick Color Sleeves simplify the process of adding
filter to almost any fluorescent source. Choose from among
the entire range of Rosco filters to add color, balance color
temperature or block harmful UV rays. A flat, welded
envelop of Rosco gel, the Quick Sleeve easily puffs open
to slide down directly onto a fluorescent lamp. Available
in standard sizes for T5, T8 or T12 lamps in nominal

22.5in, 48in or 60in lengths, Quick Sleeves can also be
special ordered for less common fluorescent sizes and
shapes – including the diverse array of compact fluorescent
lamps. Any color of Rosco gel can be made into a Quick
Sleeve with no minimum order requirements. Unlike rigid
tube guards, these lightweight sleeves fold flat for fast inex­pensive shipping.

• Any Rosco gel color available with no minimum
order

• T5, T8 or T12 standard diameters. Custom tubes
available upon request.

• 22.5in, 48in, 60in standard lengths. Custom
lengths available upon request.

• Easily cut with scissors or razor knife

• RoHS Compliant

• Meets International Flame Retardant standards.
Certification documents available upon request.

• One Year color fast warranty on standard
fluorescent lamps. (excludes HO or VHO lamps)

PRODUCT NUMBERS

QuickColor Sleeve: 110-08430- AA - BB -COLOR

AA = Length. Use “48” for 4’ Fluorescent lamps.
Use “XX” for custom length.

BB = Diameter.
Use “12” for T12, “08” for T8, “05” for T5

COLOR= Specify Rosco color number
(eg. “02” for Roscolux 02)

Example: 4’ T8 with Roscolux 02 = 110-08430-4808-02

52 Harbor View Avenue, Stamford, CT 06902 • [phone] • 1(800)ROSCO NY • Fax: [phone]

1265 Los Angeles Street, Glendale, CA 91204 • [phone] • 1(800)ROSCO LA • Fax: [phone]

Also in: Toronto, London, Madrid, São Paulo and Sydney

w w w . r o s c o . c o m

QUICKCOLOR SLEEVES

Page 1 of 1 L01 QKSLV 0308

USAGE NOTES

*Rosco does not advise the use of QuickColor or
F l u o rescent Sleeves on High Output (HO) or Ve r y High
Output (VHO) lamps due to excessive heat generated at
the electrodes. In some instances this can cause plastic
color filters or tube guards to pre m a t u r ely fail, or even
melt.

The use of Rosco UV filter in QuickColor Sleeves or
F l u o rescents Sleeves may increase the durability of these
p r oducts in typical installations. UV Filter will NOT pre v e n t
p r e m a t u re degradation on HO or VHO lamps.

Rosco Color Filters are made to exacting standards using
the highest grade polymers and dyes stuffs available.
H o w e v e r , due to variations among fixtures, ballasts, lamp
types and UV output, the longevity of QuickColor Sleeves
or Fluorescent Sleeves cannot be precisely determ i n e d .
Color fading may occur over time.