Rosco PSU-200 User Manual

PRODUCT DESCRIPTION

Rosco’s power supplies are compatible

with nearly all the color scrollers, gobo

rotators and other accessory devices in
common use.

The range consists of two different

power supplies, specified by the amount

of load they carry. The most powerful

device, PSU-400, will provide a constant load
of 400 watts (non constant load of at least 500 watts). It can
thus provide power to any combination of scrollers, rotators or
other devices requiring 400 watts of power. Each Rosco
power supply unit is labeled with a compatibility chart, show­ing all the brands and models which can be powered, along
with their power requirements listed in watts consumed (see
below).

The PSU-400 is a 19" rack mount module, equipped with
four XLR outputs and four returns. The PSU-200 also has four
outputs and four returns. It can be pipe mounted with a C­Clamp or other hanging device.

The Rosco PSU-400 includes a triple fan cooling system to
allow continuous service through the show, without fear of inter­ruption.

Rosco power supplies are RDM Upgradeable (pending the
completion on the RDM specification).

POWER SUPPLY UNITS

PSU-400

COMPATIBLE EQUIPMENT/POWER NEEDS:

Watts
Rosco I-Cue 17 watts
Rosco DMX Indexing Rotator 6 watts
AC Lighting/Apollo Chroma Q Broadway 22 watts
AC Lighting/Apollo Chroma Q M1, 2, 5, 8 36 watts
Apollo Roto-Q 12 watts
City Theatrical DMX Iris 8.5 watts
DHA Gobo Carousel 18 watts
DHA Twin DMX 12 watts
Rainbow 6", 8", 12" Pro Colour Scroller 14 watts
Rainbow 15" Pro Colour Scroller 29 watts
Gam Indexable Twin Spin 14.4 watts
Gam SX-4, 6 Gobo Tray 10.8 watts
Wybron Forerunner 14 watts
Wybron Lightwand 10 watts

PRODUCT NUMBERS

No. 205 71402 0400 PSU-400
No. 205 71402 0200 PSU-200

PRODUCT SPECIFICATIONS

PSU-400

400W for constant load,
@ 500W for non-constant loads

5.6A @ 115 V, 2.8A @ 230V
19" rack mount style
Auto sensing for 100, 120 and

240 volts
DMX pass-through
4 XLR outputs
4 XLR returns
Overload protection on Power

Supply (auto recovery)
Triple fan cooled
Onboard Termination switch

PSU-200

200W for constant load,
@ 300W for non-constant load

2.8A @ 115 V, 1.4A @ 230V
Pipe mountable with C-clamp

Auto sensing for 100, 120 and

DMX pass-through
4 XLR outputs
4 XLR returns
Overload protection on Power

Single fan cooled
Onboard Termination switch

PSU-200

240 volts

Supply (auto recovery)

www.rosco.com

52 Harbor View Avenue, Stamford, CT 06902 • [phone] • 1(800)ROSCO NY • Fax: [phone]
1120 N. Citrus Avenue, Hollywood, CA 90038 • [phone] • 1(800)ROSCO LA • Fax: [phone]

Also in: Toronto, London, Madrid, São Paulo and Sydney