Rosco Pica Portal 125 Data Sheet

PICA PORTAL™125

DESIGNED BY THE BLACK TANK

Simplified Power + Data Distribution for Pica Cubes

™

The Pica Portal empowers electricians and contractors to provide
power and data to remotely located Pica Cubes for clean and simple
installations in architectural, museum, and entertainment
applications. Capable of powering and controlling up to four Pica
Cubes, the Pica Portal utilizes a common Cat5 cable to deliver both
low-voltage power and DMX signal to a Pica Cube located up to 240’
(73m) away from the Portal.

To connect Pica Cubes to the Pica Portal, simply plug the Pica Portal
into AC power and then connect it to a DMX control source using a
5-pin DMX cable. From there, connect up to four Pica Cubes to the output ports on the Pica Portal using
standard CAT5 Ethernet cables. The Pica Portal is convection cooled, has built in electrical safety features and
features integral mounting points for ease of installation.

PICA CUBES

™

DMX

Controller

SPECIFICATIONS

Input Voltage: 90 - 240 VAC 50/60Hz

Output Voltage: 24VDC

Power Consumption: 125 Watt at maximum output

Power Input: IEC Power Cable

Connectors: DMX 5-pin XLR male & female/ 4x RJ45

Max. Cable Run: Up to 240’/73m each from the portal

Operating Temp.: -13° to 113° F (-20° to 45° C)

Humidity: 0 - 95% non-condensing

Dimensions: 7.25in x 5in x 2.22in (184mm x 127mm x 56mm)

Weight: 1.5 lbs (.68 kg)

Housing: Surface Mount ABS Plastic Enclosure

Approvals: FCC Class A Radiated and Conducted

ETL / UL Standards 1573 and 8750 / CE

8.75

7.25

PICA PORTAL™125

DESIGNED BY THE BLACK TANK

CAT5 Cable

5 pin DMX Cable

5.00

2.22

www.rosco.com