Rosco Opti-Flecs 30 Datasheet
OPTI-FLECS filters represent the next generation of lighting control filters from
Rosco. Intended specifically for use with LED light fixtures, this range of 21
semi-rigid plastic filters enhances the quality of solid-state lighting - sources that
are typically less flattering and more difficult to properly control and shape. The
OPTI-FLECS palette is comprised of diffusions and beam control filters to soften or
shape the light output. In addition, a family of color corrections, tints and neutral
density filters target specific spectral spikes and result in a more pleasing color
quality. Taken together, the OPTI-FLECS range provides lighting professionals with
the solutions they need for virtually any LED lighting application.
SPECIFICATIONSBENEFITS
OPTI-FLECS
For LED Enhancement
Correction and Softening
• Reduce glare and harsh shadows created by directional
LED sources.
• Soften output to eliminate multiple shadows typical of
fixtures using LED arrays
• Highly efficient beam shaping filters serve as lens
solutions shaping and spreading light in a predicatble
pattern.
• Correct distorted beam pattern produced by some LED
fixtures
• Lessen the impact of the blue and green spike commonly found in cool white LED sources. Especially useful in
broadcast and photographics applications
• Enhance skin tones or add warmth and richness on lit
objects
• Color frame unnecessary in most instances
PRODUCT USAGE GUIDELINES
For use on low heat sources only
OPTI-FLECS is intended for use on low-heat LED sources only and is not suitable for use on high heat fixtures. Opti-FLECS
filters are designed to be installed externally and are not intended to be used as an internal fixture component where higher
operating temperatures may be present
Color Palette 21 Filters (8 beam shaping diffusions +
13 color correction filters and tints
Custom colors available. POA
Standard
Dimensions
Thickness Nominal 10mil-13mil thick
Substrate Polyester
Cutting Hand held with scissors or matte knife
Optimal Working
Temperature Range
60x60cm (23.6”x23.6”)
30x30cm (11.81”x11.81”)
Custom sizes and shapes available. POA
(250um - 330um)
Suitable for die cutting and laser cutting
-35°F - 240°F (-37.2°C – 115.6°C)
LED Installation
OPTI-FLECS is intended for use as an external accessory for LED fixtures. It should not be installaed as an internal component
in direct contact or immediate proximity to LED boards or emitters. Sufficient distance should be maintained from the surface of
LED emitter to prevent color migration from intense photonic energy. Minimum distance is 3/4in (18mm) but may vary with
wavelength and power output of the specific LED. Test for best performance.
www.rosco.com
STANDARD COLORS AND DIFFUSIONS
Name Min Stop Transmission
OPTI-FLECS 9101 - Smoothing Frost 0.5 stop N/A
OPTI-FLECS 9106 - Powder Frost 0.5 stop N/A
OPTI-FLECS 9116 - Double Hamburg Frost 0.2 stop N/A
OPTI-FLECS 9121 - Silk 0.3 stop N/A
OPTI-FLECS 9201 - Soft Pink Tint 1.0 stop N/A
OPTI-FLECS 9206 - Soft Rouge 0.8 stop N/A
OPTI-FLECS 9211 - Soft Amber 0.7 stop N/A
OPTI-FLECS 9216 - ND Frost 2.0 stop N/A
OPTI-FLECS 9301 - Barely Minus Green 0.3 stop 79.30%
OPTI-FLECS 9306 - 1/4 Minus Green 0.4 stop 72.50%
OPTI-FLECS 9311 - 1/2 Minus Green 0.5 stop 63.70%
OPTI-FLECS 9316 - Rouge 0.7 stop 60.60%
OPTI-FLECS 9321 – Blushed 0.5 stop 65.70%
OPTI-FLECS 9326 - Barely Bronze 0.4 stop 74.50%
OPTI-FLECS 9331- Warm Bronzer 0.9 stop 55.70%
OPTI-FLECS 9406 - Bastard Amber 0.4 stop 68.70%
OPTI-FLECS 9411 - 1/4CTO 0.4 stop 74%
OPTI-FLECS 9416 - 1/2CTO 0.5 stop 63.50%
OPTI-FLECS 9421 - Golden Bronzer 0.7 stop 59.90%
OPTI-FLECS 9501 - .3ND 1.1 stop 44.60%
OPTI-FLECS 9506 - .6ND 2.1 stop 22.60%
OPTI-FLECS
For LED Enhancement
Correction and Softening
STANDARD ORDER INFORMATION
107 - 8XXXX (4 digit product code) – YYYY (1060 for 10mil 60cm square 1030 for 10mil 30cm square)
eg: 107-89326-1030 Barely Bronze 30cm x 30cm
SPECIFYING CUSTOM OPTI-FLECS FILTERS
OPTI-FLECS filters can be customized to different thickness and different colors, upon request. Minimum order quantity and
pricing to be determined.
Material Thickness Options
10mil - nominal 10mil-13mil (250um - 330um)
30mil - nominal 30mil-33mil (762um - 838um)
Other substrates available. Contact Roso for details
Color Specifications
Custom color may be selected from among Rosco’s gel filter ranges - Roscolux, Cinegel, GamColor and E-Colour. Some colors
may not be suitable. Contact Rosco for details.
Minimum Order Quantity
A minimum of 100 sq feet (9.3 sq m) per color.
Material can be cut to specifications, additional charges will apply.
Lead times vary based on production demands. Contact Rosco for details.
www.rosco.com
Loading...