Rosco DigiComp HD Data Sheet
DigiComp® HD Paint
Rosco DigiComp HD paints are specially formulated to provide the
proper luminance and RGB values for optimum separation of the
foreground and background in digital compositing. The precise
formulation of the single-source pigments found in DigiComp HD
paints produces a highly-specific spectral reflectance along with a
high-gain reflectivity - resulting in a bright, narrow bandwidth of green
or blue that make DigiComp HD easy to use with any digital
compositing system.
DigiComp HD is manufactured to have an ultra-flat finish, which means
there is no sheen or gloss in the finish at all. This is important because
any sheen/gloss will appear as white or yellow on camera – not green
or blue – and may spoil your key.
SURFACE PREP
Surfaces should be clean, dry and free from dirt and grease. Prepare surfaces using an appropriate primer. If painng a new plaster
surface, prime wall with a primer/sealer designed for raw plaster. For best results use DigiComp HD over a white primer such as
Rosco Tough Prime White. Make sure the prime coat is adequate and that it results in a flat and even surface. Any blotchy areas or
roller marks may bleed through and cause an uneven finish coat.
APPLICATION
Sr contents very well before and during use. Commercial shaking one day before use is recommended. Rosco DigiComp HD
paints come ready to use straight out of the can. Combining different batch numbers is highly recommended for color consistency.
Apply in thin, even, uniform coats, using a 3/8” nap roller. Use overlapping strokes, making sure to keep a wet edge. Change roller
direcon oen to avoid paerns and streaking. An appropriate airless spray (HVLP recommended) system may also be used. Make
sure to keep the nozzle of the sprayer equidistant from the surface during applicaon.
SPECIFICATIONS
Coverage: Approx. 300 sq. ./US gal. (27 sq. m/US gal)
Due to the nature of the bright pigments
used, two coats of DigiComp HD are
recommended for even coverage.
Drying Time: 30 minutes to one hour, depending on
temperature and humidity. Allow first coat to
dry completely before applying the second
coat.
BIinder Type: Water-based, vinyl acrylic
Finish: Ultra-Flat
Diluon: Ready for use directly out-of-can
Film Thickness: 2 mils dry film.
VOC Content: Max 50g/L
Shelf Life: Minimum 12 months for an unopened can.
Clean up: Clean hands, brushes, rollers and other equipment
with warm, soapy water immediately aer use.
USE COMPLETELY OR DISPOSE OF PROPERLY.
Dry empty containers may be recycled in a can
recycling program. Local disposal requirements
vary; consult your sanitaon department or
state-designated environmental agency on
disposal opons.
DigiComp® HD Paint
Item Code Description
150057500128
150057500640
150057510128
150057510640
DigiComp HD Paint Blue - 1 Gallon
DigiComp HD Paint Blue - 5 Gallon
DigiComp HD Paint Green - 1 Gallon
DigiComp HD Paint Green - 5 Gallon
DigiComp® HD Paint
COLOR SPECIFICATIONS
The posion of the DigiComp HD Blue and Green signals
on the vectorscope indicate the high level of chrominance
and luminance that are crucial for a successful mae. The
open squares shown on this diagram indicate the points at
which chrominance and luminance are maximized. Note
that the values of the DigiComp HD colors virtually
replicate the theorecal ideals.
ENVIRONMENTAL HEALTH AND SAFETY INFORMATION
Use only with adequate venlaon. Do not breathe spray mist
or sanding dust. Ensure fresh air entry during applicaon and
drying. Avoid contact with eyes and prolonged or repeated
contact with skin. Avoid exposure to dust and spray mist by
wearing a NIOSH approved respirator during applicaon,
sanding and clean up. Follow respirator manufacturer’s
direcons for respirator use. Close container aer each use.
Wash thoroughly aer handling.
First Aid: In case of eye contact, flush immediately with
plenty of water for at least 15 minutes; for skin,
wash thoroughly with soap and water. If
symptoms persist, seek medical aenon. If you
experience difficulty breathing, leave the area to
obtain fresh air. If connued difficulty is
experienced, get medical aenon immediately.
KEEP OUT OF REACH OF CHILDREN.
PROTECT FROM FREEZING.
Warnings: This product contains a chemical known to the state of
California to cause cancer and birth defects, or other reproducve
harm.
If you scrape, sand, or remove old paint, you may release lead dust.
LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.
Wear a NIOSH approved respirator to control lead exposure. Clean
up carefully with a HEPA vacuum and a wet mop. Before you start,
find out how to protect yourself and your family by contacng the
Naonal Lead Informaon Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
The graph shows where the DigiComp HD Blue and Green
colors fall on the spectrum and the percentage of the
wavelength (color) that is reflected back to the viewer/camera.
Incident light reading: f4
Reflectance readings: Blue f4.5
Green f2.8
In Case of Spill: Absorb with inert material and dispose of as
specified under “Clean Up”.
Refer to Safety Data Sheet for addional health and safety
informaon.
Loading...