Rosco Braq Cube 4C Datasheet

The Braq Cube™ 4C packs an unprecedented 100 watts of output into just a 5 inch
cube! Despite its surprisingly small size, the Braq pushes out more than enough light
to replace conventional wash lights on stage, film sets or commercial architecture.

Sharing the same best in class RGBW quad-chip emitters used in Braq’s smaller sibling, the Miro
Cube™, a gorgeous palette of saturated, mid-tone and pale tint colors can be dialed in at the touch
of a button. And of course, a true white is always available as well, not the unflattering mixed amber
compromise found in other lights. The single chip optic eliminates multi-colored shadows and
creates a powerful, fully blended color wash wherever the designer needs it.

Smart programming in the Braq Cube 4C includes a stand-alone color wash mode and allows
multiple units to be easily slaved together, synchronized and off-set using self-generated DMX for
color chases and other dynamic lighting patterns without a console. Use it alone, configured in
strips & arrays or build it directly into the set or architecture for virtually any application needing
colored light, including: stage productions, broadcast studios, bars & casinos, up-scale lobbies and
retail stores.

BLACK TANK ENGINEERING ADVANTAGES

• 4C single chip optic casts fringe-free shadows

• Unique patented heat management system packs the most lumens

into the smallest form factor

• No expensive power supply or ballasts needed - plug directly into

mains power 90-240 VAC

• Neutrik Powercon connector and pass-thru for easy daisy-chain

configuration

• Over 20 luminaires can be powered on a single 20A circuit

• Power Cord configurations include:

• 8-ft AWG16 cord with Neutrik Powercon and 3-prong

Edison ends

• No cord

SPECIFICATIONS

Part No.

515 90100 1014 Braq Cube 4C w/Power Cord – Black
515 90100 2014 Braq Cube 4C w/Power Cord – White

BRAQ CUBE™ 4C

DESIGNED BY THE BLACK TANK

Massive output, tiny footprint!

• Optional Power Cord Accessories include:

• 8-ft AWG16 cord with Neutrik Powercon and 3-prong

Edison ends, in-line switch

• 8-ft AWG16 cord with Neutrik Male/Female ends

(Powercon Pass-Thru)

• Flicker-free dimming in 8- or 16-bit resolution

• Intuitive full text LCD panel for manual operation

• Easily installed on standard line-voltage lighting track with

optional yoke assembly, including full DMX track options

• Full assortment of spot, medium and wide lenses included

• Novel “filament mode” mimics the delayed blackout glow of

incandescent fixtures

• Modular design easily configures in strips and arrays for maximum

versatility

Input Voltage

Power Input

90 – 240 VAC 50/60Hz

Neutrik Powercon input and pass-thru

515 90100 1114 Braq Cube 4C – No Power Cord – Black
515 90100 2114 Braq Cube 4C – No Power Cord – White

515 91015 0005 Miro/Braq Powercon Cord w/Edison Plug
515 91017 0001 Powercon Pass-Thru Cable

LED 7 x 12W Osram Ostar multi-chip

Output 1800 Lumens (no lens)

Lumen
Maintenance

Color Range 4.2 billion discrete mixes (255 x 255 x 255 x 254)

Operation

80,000 hours B10 L70 at 25°C
(LM79-08 Standard)

DMX: 8 or 16 bit DMX512
Manual: Full Text LCD interface sets color output

Data

Power Consumption 100 Watt at maximum output

Operating Temp -13° to 113° F (-20° to 45° C)

Humidity 0 – 95% non-condensing

Dimensions 5in x 5in x 5.3in (127mm x 127mm x 135mm)

Weight 3.5 lbs (1.6 kg)

Housing Powder coated aluminum extrusion (1/8 in wall)

Approvals FCC Class A Radiated and Conducted

5-pin XLR Male, 5-pin XLR Female - DMX

ETL / UL Standards 1573 and 8750
cETL / CSA C22.2#166-M1983
CE
IP20 Rated

RoHS

COMPLIANT

www.rosco.com