Roper RGD4440VQ1, RGD4440VQ0, RGD4400VQ1, RGD4400VQ0, RED4440VQ1 Owner’s Manual

...

DRYERUSERINSTRUCTIONS

INSTRUCTIONSD'UTILISATIONDELASECHEUSE

Table of Contents / Table des mati res

ASSISTANCE OR SERVICE ............................ 1

ACCESSORIES ................................................. 1

DRYER SAFETY ............................................... 2

DRYER USE ...................................................... 4

DRYER CARE ................................................... 5

TROUBLESHOOTING ...................................... 6

WARRANTY ...................................................... 8

ASSISTANCE OU SERVICE ............................. 9

ACCESSORIES ................................................. 9

SI_CURITI_ DE LA SI_CHEUSE ........................ 9

UTILISATION DE LA SI_CHEUSE .................. 11

ENTRETIEN DE LA SI_CHEUSE .................... 12

DEPANNAGE ................................................... 14

GARANTI E....................................................... 16

Ass s?snc® o S®twc®

If you need assistance or service, first see the "Troubleshooting" section. Additional help is available by calling our Customer eXperience Center at 1-800-44-ROPER (1-800-447-6737} from

anywhere in the U.S.A., or write:

Roper Brand Home Appliances

Customer experience Center

553 Benson Road

Benton Harbor, MI 49022-2692

To order parts and accessories, call 1-800-442-9991 In Canada, for assistance, installation or service call,

1-800-807-6777, or write:

Customer Interaction Centre

Whirlpool Canada LP

1901 Minnesota Court

Mississauga, Ontario LSN 3A7

Information may also be obtained by visiting our website at www.roperappliances.com.

In Canada, visit www.roperappliances.ca. Please include a daytime phone number in your correspondence.

Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.

Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need

to know your complete model number and serial number. You can find this information on the model and serial number label, located at the top inside dryer door well.

Enhance your dryer with these premium accessories. For more high-quality items or to order, call 1-800-901-2042, or

visit us at www.applianceaccessories.com. In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Part Number Accessory

20-48KITRC 4 ft (1.2 m) gas line dryer connector installation

kit

PT220L 4 ft (1.2 m) dryer cord, 3-wire, 30 amp PT400L 4 ft (1.2 m) dryer cord, 4-wire, 30 amp PT600L 6 ft (1.8 m) dryer cord, 4-wire, 30 amp 8212614 Dryer vent lint brush

31682 All-purpose appliance cleaner

1903WH Laundry supply storage cart

3404351 Drying rack - fits 29" (73.7 cm) Super Capacity,

6.5 cu. ft (0.18 cu. m) - side swing or hamper door

3406839 Drying rack - fits 29" (73.7 cm) Super Capacity

Plus, 7.0 cu. ft (0.20 cu. m) - side swing door

only 49971 Compact dryer stand - white 49572 LP gas conversion kit

Dealer name Serial number

Address Phone number

Model number Purchase date

W10151576A

DRYERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WAR NING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer. [] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry- cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

[] Do not reach into the dryer if the drum is moving. [] Do not install or store the dryer where it will be exposed

to the weather.

[] Do not tamper with controls.

SAVE THESE INSTRUCTIONS

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this Use and Care Guide or in published user-repair

instructions that you understand and have the skills to carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load. [] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust, and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See installation instructions for grounding requirements.

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building, or area of all occupants.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency, or the gas supplier,

Your dryer must be properly installed and vented to achieve maximum drying efficiency and shorten drying times. Use the

minimum recommended installation clearances found in the Installation Instructions. See the Installation Instructions for more

information.

Fire Hazard

Use a heavy metal vent. Do not use a plastic vent.

Do not use a metal foil vent. Failure to follow these instructions can result in death

or fire.

If the dryer is not properly installed and vented, it will not be covered under the warranty. Proper venting of your dryer is important for satisfactory drying results. See the Installation

Instructions for more detail. NOTE: Service calls caused by improper venting will be paid for

by the customer, whether it was a paid installation or self- installed.

1. Do not use plastic vent or metal foil vent. Use 4" (10.2 cm) metal or flexible metal vent. Do not kink or crush flexible metal

vent. It must be completely extended to allow adequate

exhaust air to flow. Check vent after installation. Refer to the Installation Instructions for proper length requirements of vent.

Use a 4" (10.2 cm) exhaust hood.

Use the straightest path possible when routing the vent.

Good Better

Use clamps to seal all joints. Do not use duct tape, screws or other fastening devices that extend into the interior of the vent

to secure vent.

Clean exhaust vent periodically, depending on use, but at least every 2 years, or when installing your dryer in a new location. When cleaning is complete, be sure to follow the Installation Instructions supplied with your dryer for final

product check.

DRYERUSE

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

This booklet covers several different models. Your dryer may not have all of the cycles and features described.

Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping.

1. Clean lint screen before each load. See "Cleaning the Lint Screen."

2. Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for clothes to tumble freely.

3. Turn the Cycle Control knob to the recommended cycle for the type of load being dried. Use the Energy Preferred Automatic Setting (*)to dry most heavy to medium-weight fabrics.

4. If your dryer has a Temperature selector, set it to the recommended setting for the type of fabric being dried. See

"Dryer Cycle Descriptions" (separate sheet) for temperature suggestions. On some models, temperature is included in the cycle selections.

5. (OPTIONAL) Your dryer may have a WRINKLE PREVENT TM feature selector. When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. This feature

periodically tumbles, rearranges and fluffs the load without heat to help avoid wrinkling.

6. (OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL. The signal is helpful when drying items that should be

removed from the dryer as soon as it stops. The End of Cycle signal is part of the Start button and is

selectable. Turn the PUSH TO START button to ON or OFE The signal will sound only if the selector is set to On.

7. Select the desired Option. See "Dryer Cycle Descriptions" (separate sheet).

8. If desired, add fabric softener sheet. Follow package instructions.

9. Press the PUSH TO START button.

Stopping and Restarting

Youcan stop your dryer anytime during a cycle. To stop your dryer

Open the dryer door or turn the Cycle Control knob to OFE

Fire Hazard

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

or fire.

NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use.

To restart your dryer Close the door. Select a new cycle and temperature (if desired).

Press the PUSH TO START button.

Use the Drying Rack to dry items such as sweaters and pillows without tumbling. The drum turns, but the rack does not move.

If your model does not have a drying rack, you may be able to purchase one for your model. To find out if your model allows drying

rack usage and for information on ordering, please refer to the front page of your manual or contact the dealer from whom you purchased your dryer.

NOTE: The drying rack must be removed for normal tumbling. Do not use the automatic cycle with the drying rack.

To use the drying rack

1. Place drying rack in dryer. Slide rear pegs into the dimples on the back wall of the dryer.

Lower the front legs to rest on the dryer opening.

Put wet items on top of rack, leaving space between items. Do not allow items to hang over the edge of the rack. Close

the door.

Select a timed drying cycle and temperature, or an air cycle. Items containing foam, rubber, or plastic must be dried on a clothesline or by using an air cycle. Refer to the following

table.

4. Start the dryer. Reset cycle to complete drying, if needed.

Rack Dry Cycle Temp Time

Washable wool items (block Timed Low 60 min. to shape, lay flat on rack) Drying

Stuffed toys/pillows (cotton Timed Low 60 min. or polyester filled) Drying

Stuffed toys/pillows Air N/A 90 min. Foam rubber filled (no heat)

DRYERCARE

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

As Needed Cleaning

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Replace screen in dryer.

Explosion Hazard

Keep flammable materiaJs and vapors, such as

gasoline, away from dryer. Place dryer at least 18 inches (46 cm) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

Clean lint screen before each load. A screen blocked by lint can increase drying time.

IM PORTANT:

• Do not run the dryer with the lint screen loose, damaged, blocked or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

• If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint.

Every Load Cleaning

Style 1:

1. The lint screen is located on top of the dryer. Pull the lint screen toward you. Roll lint off the screen with your fingers.

Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

Ceqn tIse

Apply a liquid, nonflammable household cleaner to the stained area of the drum and rub with a soft cloth until stain is

removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum. NOTE: Garments that contain unstable dyes, such as denim blue

jeans or brightly colored cotton items, may discolor the dryer

interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to

avoid transfer of dye.

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.

From Inside the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Vacation care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time,

you should:

1. Unplug dryer or disconnect power.

2. If you have a gas dryer, close shutoff valve in gas supply line.

3. Clean lint screen. See "Cleaning the Lint Screen."

...... _J _' _

2. Push the lint screen firmly back into place.

Style 2:

1. The lint screen is located in the door of the dryer. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do

not rinse or wash screen to remove lint. Wet lint is hard to remove.

2. Push the lint screen firmly back into place.

Moving care - Electric Dryers

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Make sure leveling legs are secure in dryer base.

3. Use masking tape to secure dryer door.

+ 11 hidden pages