Roper 2406, 2426 Owner's Manual

ELECTRIC RANGE

MODELS 2406, 2426

OPERATING GlJlDi

1. Plug-In Cooktop Units

2. Lift-Up Cooktop

3. Clock with 4-Hour Timer

4. Oven Interior Light Switch

6. Removable Black Glass
Oven Door With Window

FEATURES

6. Storage Drawer

7. Oven Thermostat

8. Push-To-Turn Cooktop Unit Controls

9. Surface Signal Light

10. Oven Signal Light

Part No. 331335

4jy7s’.

7

LIFT-UP COOKTOP

To set:

1. Push in and turn the knob to the correct time of day.

2. Turn the knob, without pushing in, to reset the timer
hand to OFF.

TIMER

The timer may be set for any amount of time from 1 minute to
4 hours. Turn the knob, without pushing in, to set the timer hand
to the desired time. When time is up, a signal will buzz until you

reset the timer hand to OFF. The timer is only a reminder and
will not operate the oven.

To raise

grasp the cooktop at the front and lift up.

See the cleaning chart in your Use and Care Guide. When
done cleaning, lower the support rod and cooktop.

the cooktop

so the area underneath can be cleaned,

Models with porcelain enameled cooktop:
To avoid chipping or damaging porcelain coated cooktop, be
careful not to drop or force cooktop when ralsing or lowering.

SUPPORT

ROD

/

COOKTOP UNITS

See your
care of the cooktop units.

Use

and Care Guide for information on the use and

OVEN/BROILER

To use the bake and broil oven, set the Thermostat for the desired
temperature or to the mark by the word BROIL. See your Use and
Care Guide for more information.

SIGNAL LIGHTS

Surface (Cooktop):

cooktop elements is turned on.

Oven:

will glow when oven is turned on. When the oven has

reached the set temperature, the light will go off, then cycle
on and off with the oven to show the-temperature is being
maintained.

will glow whenever one or more of the