Room & Board Portica Assembly Instruction

assembly instructions: hudson bed

headboard

side rail

List of parts

1 – headboard

1 – footboard

1 – center slat suppor t

1 – center support leg

2 – side rails

12 – slats

Tools needed

rubber mallet

MADE IN West Virgi nia

footboard

Directions

1. Hold headboard upright near its desired placement.

2. With side rail at a 90º angle, attach one end of side rail into headboard interlocking

hardware.

3. Push down on side rail to ensure it interlocks.

4. Use rubber mallet to tap into place, ensuring tight fit.

5. Attach footboard in the same manner as headboard.

6. Remove long center slat support from slat bundle and attach center support leg by

screwing it into “T” nut embedded in support. Lock both ends of slat suppor t into center

brackets making sure notched-out end is located at footboard.

7. Insert slats into side rail slots. Adjust center suppor t leg until it fits tight to the floor.

8. Place mattress on slats.

tip

Wood naturally expands and contracts causing bed connections to loosen over time. This
process is a natural characteristic of wood. Tighten hardware occasionally to restore the bed
to original stability.

800.301.9720 | roomandboard.com

4/1/11