Room & Board Piper Assembly Instruction

assembly instructions: mackintosh bed

headboard

side rail

footboard

List of parts

1 – headboard

1 – footboard

2 – side rails

10 – slats (twin or full bed) or

12 – slats (queen, king and

california king bed)

Tools needed

rubber mallet

MADE IN M innesota

Directions

1. Hold headboard upright near its desired placement.

2. With plastic pieces facing in, place one side rail tab in the metal pocket of headboard.

Repeat for other side.

3. Attach footboard to both rails in the same manner as headboard.

4. Place slats onto the side rails matching the slots in each slat to the rivet on the side rails.

5. Place mattress on slats.

note

When disassembling, use rubber mallet to remove side rail tab from metal pocket.

800.301.9720 | roomandboard.com

4/1/11