Room & Board Mackintosh Assembly Instruction

Portica Canopy Bed Assembly Instructions

List of parts: 1 - headboard

1 - footboard

2 - side rails

2 - canopy top rails

10 - slats (full)

12 - slats (queen/king/california king)

Hardware: 4 - screws or finials

Tools needed: phillips or slotted screwdriver

rubber mallet

Directions:

headboard

footboard

canopy rails

1. Hold headboard upright near its desired placement.

2. With plastic pieces facing in, place one side rail tab in the metal pocket
of headboard. Repeat for other side.

3. Attach footboard to both rails in the same manner as headboard.

4. Place slats onto the side rails matching the slots in each slat to the rivet
on the side rails.

5. Place mattress on slats.

6. Place canopy rails with tabs upright on top of bed posts. Push headboard
and footboard together.

7. Secure rails with screws or finials.

Note: When disassembling, use rubber mallet to remove side rail tab from
metal pocket.