Rongta Technology RPP200 Users manual

200 Series Printer

User

Manual

Catalog

I NOTICE ...............................................................................................................................3

1.1 Safety Notice .................................................................................................................4

1.2 Usage Notice ................................ ................................................................ .................4

1.3 Storage Notice ...............................................................................................................5

1.4 Battery Safety Notice .....................................................................................................5

II PRODUCT INTRODUCTION ............................................................................................7

2.1 Printer outer design ........................................................................................................7

2.2 Accessories ....................................................................................................................8

III Performance .......................................................................................................................9

3.1 Print Performance ..........................................................................................................9

3.2 Physics Parameter ..........................................................................................................9

3.3 Environment Parameter .................................................................................................9

3.4 Other Performance .........................................................................................................9

IV Introduction...................................................................................................................... 10

4.1 Preparing before usage ................................................................................................ 10

4.1.1 Battery Installation ................................ ................................................................ 10

4.1.2 Paper Roll Installation ........................................................................................... 10

4.2 Basic Function ................................................................ ................................ ............. 12

4.2.1 Power On .............................................................................................................. 12

4.2.2 Power Off.............................................................................................................. 12

4.2.3 Self-Test ................................................................................................................ 12

4.2.4 Feed (Feed Manually) ........................................................................................... 12

4.2.5 Charge................................................................................................................... 12

4.3 Printer Connecting and Printing ................................................................................... 13

4.3.1 USB Interface Connecting..................................................................................... 13

4.3.3 Bluetooth Matching and Printing........................................................................... 14

4.3.4 Using Bluetooth Interface to Print ......................................................................... 14

4.4 Indicator Light and Buzzer Signal Description ............................................................ 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation. Thi s equipment generates, uses and can radiate radio frequency energy and, if not installe d and used in accordance with the instructions, may cause harmful interference to radi o communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or te levision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following m easures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the rec

eiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modiﬁcations to this device not explicitly approved by manu facturer could void your authority to operate this equipment.This device complies wit h part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any i nterference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an unco ntrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter.

I NOTICE

Please read the following information carefully before using the printer!

1.1 Safety Notice

(1) This printer can only use battery and power adapter provided by our

company, or it may cause damage to the printer, battery leakage, fire or explosion.

(2) Do not put the battery into the fire, not make it short circuit, break up or

heating, otherwise it may cause the battery leakage, fire or explosion.

(3) The battery liquid is corrosive, if the user’s careless operation leads the

battery leakage and the liquid viscosity to the skin or the clothes please use the clean water for washing immediately, if accidentally into the eyes, please rinse with plenty of clean water to wash the eyes then goes to the hospital.

(4) Do not open paper cover and use hand or any part of body to touch the

printer mechanism when printing or printing just end, to avoid the exorbitant temperature causes Scald.

(5) Do not use the printer when the operation is failed because that would cause

a fire or electric shock. Please turn off and unplug it, then call the dealer.

1.2 Usage Notice

(1) The printer can’t be immerged into the water and not be exposed in the rain

for a long time; otherwise it may lead the damage to the printer.

(2) Do not open the paper cover when printing or it may cause the printer

working improperly.

(3) If use the serial interface to print, do not pull off the serial line when

printing, otherwise it may result in incompletion of the final print data.

(4) When using IR to print, the user should aim the IR windows of main

equipment at the IR windows of printer, the distance between them should be not more than 50 centimeters, and the angle should not exceed 30 degrees, or it may lead to print garbled or unable to print.

(5) The printer could work stably from -10°C to 50°C , but the higher

temperature (>/=45°C ) or lower temperature (</=5°C ) would debase the print quality. Higher humidity (>/=85%) or lower humidity (</=20%) also may debase the print quality.

(6) Use the bad print paper or long time storage paper would affect the print

quality, even damage the printer.

(7) When the printer is working in black mark detection mode (when printing

the pre-print receipt with black mark), it requires the black mark that on the pre-print paper is accord with black mark printing standard (as details in

4.2 Pre-print Black Mark Instruction), otherwise it may lead the printer disable to detect the black mark accurately. The battery of the printer is better running out before charging, which could effectively ensure the lifespan of it.

1.3 Storage Notice

(1) The printer should be stored in the environment where the temperature is

-20°C to 70°C and relative humidity is 5% to 95%.

(2) If the user plan to store the printer for a long time, please be sure to take out

the battery and stored it separately, or it may result in the battery lose efficacy, even leakage and then damage the printer.

(3) The storage time of common thermal paper is short, if the user need to print

the long-term preservation receipt, please use long-acting thermal paper. Do not store the thermal paper in a high temperature or direct sunlight environment, if it has been sealed off, please store it in dark place.

1.4 Battery Safety Notice

Please read this user manual carefully before using the printer. Ignoring the followings may cause overheating, burning, explosion, damage of the battery and/or debase the lifespan of the printer.

Warnings:

(1) Do not let water or sea water in or leak into the battery. If the safety device

in it is burned out, any charge of it would lead abnormity current and or

+ 10 hidden pages

Rongta Technology RPP200 Users manual

Specifications and Main Features

Frequently Asked Questions

User Manual