Rongta Technology RPP02N BU Users manual

Mobile Thermal Printer

RPP02N USER MANUAL

Xiamen Rongta Technology Co., Ltd.

Contents

I. Notice ..................................................................................................................................2

1.1 Safety Notice ................................ ................................ ................................................. 2

1.2 Usage Notice .................................................................................................................2

1.3 Storage Notice ...............................................................................................................3

1.4 Battery Safety Notice .....................................................................................................3

II. Introduction ......................................................................................................................5

2.1 Printer outer design ........................................................................................................5

2.2 Accessories ....................................................................................................................6

III. Performance ....................................................................................................................7

3.1 Print Performance ..........................................................................................................7

3.2 Physics Parameter ..........................................................................................................7

3.3 Environment Parameter .................................................................................................7

3.4 Other Performance .........................................................................................................7

IV. Introduction ....................................................................................................................8

4.1 Preparing before usage ..................................................................................................8

4.1.1 Battery Installation ..................................................................................................8

4.1.2 Paper Roll Installation .............................................................................................8

4.2 Basic Function ...............................................................................................................9

4.2.1 Power On ................................................................................................................9

4.2.2 Power Off................................................................................................................9

4.2.3 Self-Test ..................................................................................................................9

4.2.4 Feed (Feed Manually) ........................................................................................... 10

4.2.5 Charge................................................................................................................... 10

4.3 Printer Connecting and Printing ................................................................................... 10

4.3.1 Serial Interface Connecting ................................................................................... 10

4.3.2 USB Interface Connecting..................................................................................... 10

4.3.3 The Bluetooth Matching and Printing.................................................................... 10

4. 4 Indicator Light and Buzzer Signal Description ........................................................... 11

www.rongtatech.com 1

Xiamen Rongta Technology Co., Ltd.

I. Notice

Please read the following information carefully before using the printer!

1.1 Safety Notice

This printer can only use battery and power adapter provided by our company, or

it may cause damage to the printer, battery leakage, fire or explosion.

Do not put the battery into the fire, not make it short circuit, break up or heating,

otherwise it may cause the battery leakage, fire or explosion.

The battery liquid is corrosive, if the user’s careless operation leads the battery
leakage and the liquid viscosity to the skin or the clothes please use the clean water
for washing immediately, if accidentally into the eyes, please rinse with plenty of
clean water to wash the eyes then goes to the hospital.

Do not open paper cover and use hand or any part of body to touch the printer
mechanism when printing or printing just end, to avoid the exorbitant temperature
causes scald.

Do not use the printer when the operation is failed because that would cause a fire
or electric shock. Please turn off and unplug it, then call the dealer.

1.2 Usage Notice

The printer can not be immerged into the water and not be exposed in the rain for
a long time; otherwise it may lead the damage to the printer.

Do not open the paper cover when printing or it may cause the printer working
improperly.

If use the serial interface to print, do not pull off the serial line when printing,
otherwise it may result in incompletion of the final print data.

When using IR to print, the user should aim the IR windows of main equipment
at the IR windows of printer, the distance between them should be not more than 50
centimeters, and the angle should not exceed 30 degrees, or it may lead to print
garbled or unable to print.

The printer could work stably from -10°C to 50°C , but the higher temperature
(>/=45°C ) or lower temperature (</=5°C ) would debase the print quality.

www.rongtatech.com 2

Xiamen Rongta Technology Co., Ltd.

Higher humidity (>/=85%) or lower humidity (</=20%) also may debase the print
quality.

Use the bad print paper or long time storage paper would affect the print quality,
even damage the printer.

When the printer is working in black mark detection mode (when printing the
pre-print receipt with black mark), it requires the black mark that on the pre-print
paper is accord with black mark printing standard (as details in 4.2 Pre-print Black
Mark Instruction), otherwise it may lead the printer disable to detect the black mark
accurately.

The battery of the printer is better running out before charging, which could
effectively ensure the lifespan of it.

1.3 Storage Notice

The printer should be stored in the environment where the temperature is -20°C
to 70°C and relative humidity is 5% to 95%.

If the user plan to store the printer for a long time, please be sure to take out the
battery and stored it separately, or it may result in the battery lose efficacy, even
leakage and then damage the printer.

The storage time of common thermal paper is short, if the user need to print the
long-term preservation receipt, please use long-acting thermal paper.

Do not store the thermal paper in a high temperature or direct sunlight
environment, if it has been sealed off, please store it in dark place.

1.4 Battery Safety Notice

Please read this user manual carefully before using the printer. Ignoring the
followings may cause overheating, burning, explosion, damage of the battery and/or
debase the lifespan of the printer.

Warning:

1. Do not let water or sea water in or leak into the battery. If the safety device in it
is burned out, any charge of it would lead abnormity current and/ or voltage and bring
unusual chemistry reaction, then cause the overheating, burning and/ or explosion of
it.

www.rongtatech.com 3