Rongta Technology RP410 Users manual

XIAMEN RONGTA TECHNOLOGY CO., LTD.

USER MANUAL

RP410

Catalogue

Manual information .................................................................................................................. 1

Safety Instruction....................................................................................................................... 3

1. Product introduction ........................................................................................................... 5

1.1 Box list ................................................................................................................................ 5

1.2 Appearance and components ................................................................................... 6

2. Product Specification .......................................................................................................... 6

2.1 Specification ..................................................................................................................... 7

3. Installation ............................................................................................................................... 8

3.1 Power connection .......................................................................................................... 8

3.2 How to connect printer and PC ................................................................................ 9

3.3 Install paper roll .............................................................................................................. 9

3.3.1 Inside ........................................................................................................................... 9

3.3.2 Outside ..................................................................................................................... 11

3.4 The operator panel ...................................................................................................... 12

3.4.1 The operational method of FEED ................................................................... 13

3.42 Led indication of printer status ........................................................................ 13

3.5 Printing Test ................................................................................................................... 13

3.5.1 Print Self-test Page .............................................................................................. 13

3.5.2 Use Windows Driver Programs to Print ........................................................ 14

3.6 Label Study ..................................................................................................................... 14

4. Clean the printer ................................................................................................................. 15

4.1 Clean the printer head ............................................................................................... 15

4.2 Clean the sensor, the rubber roller and paper path ........................................ 15

5. Troubleshooting .................................................................................................................. 16

5.1 FAQ.................................................................................................................................... 16

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

1

Manual information

This manual includes product user, installation, etc.

Please refer to the below details for all kinds of technical issues and territory.

1. Manual for driver and program.

This manual includes information such as windows instruction for driver

and program and main function.

2. Printer practical tools manual

This manual includes usage method of option of product function,

amendment of operating conditions, etc.

3. Program Manual

This manual includes information of command of label printer.

2

Safety Instruction

Please read the following precautions to avoid personal injury or equipment

damage before installing and using the printer.

1. Safety warning

Warning: The print head is heating component, during printing

and immediately after printing; do not touch the print head and

peripheral components.

Warning: Do not touch the print head and the connection plug, so

as to avoid electrostatic damage to the print head.

2. Safety Precautions

1. Do not plug several products in one multi-outlet

2. You can only use this package supplied adapter.

3. Do not pull the plug by pulling the cable way

4. Do not plug or unplug the power cord when your hands wet.

5. Do not bend the cable, or place it under heavy objects.

6. Install the printer on a stable surface.

7. Use only approved accessories, do not try to disassemble, repair, or

modification the printer.

8. Do not let water or other objects in the printer.

9. Leave enough space for operation and maintenance around the

printer.

10. The printer should be away from water, keep out of sunlight and

heat.

11. Don not USE or preserve the printer in a high temperature, humidity

or Severe pollution place.

12. Avoid to place the printer in a vibration and impact environment.

13. Connect the power adapter to a proper grounding socket, and avoid

3

to use same power socket with large electrical machine or other can

cause the power supply voltage fluctuation device.

14. Please disconnect the power of the printer power adapter, If a long

time do not use the printer.

15. In order to keep good quality of printing and long life of the product,

suggest to use recommended by the same quality of paper.

16. Plug or disconnect each interface, must turn off the power,

Otherwise it may cause the printer control electrical damage of the

road.

17. Keep this manual for reference.

4