Rongta Technology 200 Series User Manual

200 Series Printer

User

Manual

Xiamen Rongta Technology Co., Ltd.

www.rongtatech.com 2

Catalog

I NOTICE ................................................................................................................................................... 3

1.1 SAFETY NOTICE ................................................................................................................................ 3

1.2 USAGE NOTICE.................................................................................................................................. 3

1.3 STORAGE NOTICE .............................................................................................................................. 4

1.4 BATTERY SAFETY NOTICE ................................................................................................................. 4

II PRODUCT INTRODUCTION .............................................................................................................. 6

2.1 PRINTER OUTER DESIGN .................................................................................................................... 6

2.2 ACCESSORIES .................................................................................................................................... 7

III PERFORMANCE ................................................................................................................................. 8

3.1 PRINT PERFORMANCE ....................................................................................................................... 8

3.2 PHYSICS PARAMETER ........................................................................................................................ 8

3.3 ENVIRONMENT PARAMETER .............................................................................................................. 8

3.4 OTHER PERFORMANCE ...................................................................................................................... 8

IV INTRODUCTION................................................................................................................................. 9

4.1 PREPARING BEFORE USAGE ............................................................................................................... 9

4.1.1 Battery Installation .................................................................................................................... 9

4.1.2 Paper Roll Installation............................................................................................................... 9

4.2 BASIC FUNCTION............................................................................................................................. 11

4.2.1 Power On................................................................................................................................. 11

4.2.2 Power Off ................................................................................................................................ 11

4.2.3 Self-Test .................................................................................................................................. 11

4.2.4 Feed (Feed Manually) ............................................................................................................. 11

4.2.5 Charge ..................................................................................................................................... 11

4.3 PRINTER CONNECTING AND PRINTING ............................................................................................ 12

4.3.1 USB Interface Connecting ...................................................................................................... 12

4.3.2 WI-FI Communication ............................................................................................................ 12

4.3.3 Bluetooth Matching and Printing............................................................................................ 13

4.3.4 Using Bluetooth Interface to Print .......................................................................................... 13

4.4 INDICATOR LIGHT AND BUZZER SIGNAL DESCRIPTION ................................................................... 14

Xiamen Rongta Technology Co., Ltd.

www.rongtatech.com 3

I NOTICE

Please read the following information carefully before using the printer!

1.1 Safety Notice

(1) This printer can only use battery and power adapter provided by our

company, or it may cause damage to the printer, battery leakage, fire or
explosion.

(2) Do not put the battery into the fire, not make it short circuit, break up or

heating, otherwise it may cause the battery leakage, fire or explosion.

(3) The battery liquid is corrosive, if the user’s careless operation leads the

battery leakage and the liquid viscosity to the skin or the clothes please use
the clean water for washing immediately, if accidentally into the eyes,
please rinse with plenty of clean water to wash the eyes then goes to the
hospital.

(4) Do not open paper cover and use hand or any part of body to touch the

printer mechanism when printing or printing just end, to avoid the
exorbitant temperature causes Scald.

(5) Do not use the printer when the operation is failed because that would cause

a fire or electric shock. Please turn off and unplug it, then call the dealer.

1.2 Usage Notice

(1) The printer can’t be immerged into the water and not be exposed in the rain

for a long time; otherwise it may lead the damage to the printer.

(2) Do not open the paper cover when printing or it may cause the printer

working improperly.

(3) If use the serial interface to print, do not pull off the serial line when

printing, otherwise it may result in incompletion of the final print data.

(4) When using IR to print, the user should aim the IR windows of main

equipment at the IR windows of printer, the distance between them should
be not more than 50 centimeters, and the angle should not exceed 30
degrees, or it may lead to print garbled or unable to print.

Xiamen Rongta Technology Co., Ltd.

www.rongtatech.com 4

(5) The printer could work stably from -10°C to 50°C , but the higher

temperature (>/=45°C ) or lower temperature (</=5°C ) would debase the
print quality. Higher humidity (>/=85%) or lower humidity (</=20%) also
may debase the print quality.

(6) Use the bad print paper or long time storage paper would affect the print

quality, even damage the printer.

(7) When the printer is working in black mark detection mode (when printing

the pre-print receipt with black mark), it requires the black mark that on the
pre-print paper is accord with black mark printing standard (as details in

4.2 Pre-print Black Mark Instruction), otherwise it may lead the printer
disable to detect the black mark accurately. The battery of the printer is
better running out before charging, which could effectively ensure the
lifespan of it.

1.3 Storage Notice

(1) The printer should be stored in the environment where the temperature is

-20°C to 70°C and relative humidity is 5% to 95%.

(2) If the user plan to store the printer for a long time, please be sure to take out

the battery and stored it separately, or it may result in the battery lose
efficacy, even leakage and then damage the printer.

(3) The storage time of common thermal paper is short, if the user need to print

the long-term preservation receipt, please use long-acting thermal paper.
Do not store the thermal paper in a high temperature or direct sunlight
environment, if it has been sealed off, please store it in dark place.

1.4 Battery Safety Notice

Please read this user manual carefully before using the printer. Ignoring the
followings may cause overheating, burning, explosion, damage of the battery and/or
debase the lifespan of the printer.

Warnings:

(1) Do not let water or sea water in or leak into the battery. If the safety device

in it is burned out, any charge of it would lead abnormity current and or

Xiamen Rongta Technology Co., Ltd.

www.rongtatech.com 5

voltage and bring unusual chemistry reaction, then cause the overheating,
burning and/ or explosion of it.

(2) Do not use or place the battery near burner or high temperature environment.

Overheating may cause the damage to the resin shell and/or heat insulation
material, and bring the short circuit in the battery then lead the overheating,
burning and/ or explosion of it.

(3) Please use dedicated charger when charging. When charging under the

excluded conditions (such as high temperature, high voltage/current or
using modified charger) may cause excessive battery charging, abnormal
current and/ or voltage, bring unusual chemistry reaction and then may
result in overheating, burning and or explosion of it.

(4) Positive and negative poles are marked clearly on the battery. The user

should make sure the battery position is correct when inserting it in the
charger or product. Reverse insertion would lead reserve charging, may
bring unusual chemistry reaction and then cause overheating, burning
and/or explosion of the battery.

(5) Do not make the battery contact to power socket and/or car cigarette

lighting socket, which may lead high voltage, bring excessive current and
result in overheating, burning and/or explosion of it.

(6) Do not make the battery contact to power socket or car cigarette lighting

socket, which may lead high voltage, bring excessive current and result in
overheating, burning or explosion of it.

(7) Do not heat the battery or put it into the fire that may melt the heat

insulation material or damage the safety device or equipment and make the
electrolytic ignited, then bring overheating, burning and/or explosion of it.

(8) Do not make the battery poles ((+) and (-)) contact to any metal. In addition,

do not take or store it with metal materials, such as necklace, hairpin etc.
Short circuit in the battery may cause excessive current, then bring
overheating, burning and/or explosion of it and overheating of neighboring
metal materials.