Ronghua Electronic EGUARDM6069 User Manual

Shenzhen Ronghua Electronic Co., Ltd.

P1/P5

User manual

Change records

Change the

number

savagery

Change state

Change

person

date

Remarks

drawing

no.

Number

A

pages

number

5

fiction

To examine

Approval

Shenzhen Ronghua Electronic Co., Ltd. P2/P5

overview

AM M6000G‐TR detection board for 58KHz sound magnetic (AM) detection system board. The system

board is composed of a main board (M6000G‐TR),and a receiving board(M6000G‐R).

Power supply:[EG105]

AC voltage:110--120VAC@50Hz/60Hz

Power insurance：0.63A，250V

maximum current：100mA
Power consumption：<50W

Function Description:

1. Channel output

TR-CH2, TR-CH3 respectively receive two sub machines (receiver function board). Host TR-CH1
(transceiver function board + receive function board)

2.Software adjustment set：

COM: select the correct COM Drive
Baud: 115200
Parity: Even
Bits: 8

Key function:

LOAD: Read and run data from internal storage.
SET: Make interface parameters run, but shutdown is not saved.
SAVE: Store interface parameters.
Graphic phase Tuning: Look at the disturbing signal curve around.
CH4:[8] Manual commissioning of equipment；[1-7]Device automation mode

AP1, AP2, AP3 represent the

transmit amplitude of the 3

antennas, and the maximum

value is observed.

Factory settings: phase [0]; CH1-CH3 : SEN[8]; CH4:[8]; SEND MODE [MONO]; FREQUENCY[58.2K];

DELAYTIME[0]。

Installing direction of antenna：One drag two (the main panel is facing the side panel of the auxiliary

machine; the main board is in the same direction as the other side panel).

USER MANUAL

SRH.M6000G-TR.SS