We are delighted that you have chosen this Ronco Pasta Maker. This
electrical pasta machine will make the heart of every pasta lover beat
faster. The Pasta Maker takes care of the laborious task of kneading
dough for you, and with the ve different attachments you can make
almost any type of pasta in your own kitchen at home. We hope that
you will have a lot of fun with your new Pasta Maker.
Before using the device for the first time, please read the instructions
through carefully and store them in a safe place. If the device is given to
someone else, it should always be accompanied by these instructions. The
manufacturer and importer will not accept liability if the directions in these
instructions are not observed!
Meaning of the Symbols Used
All safety instructions are marked with this symbol. Read these
instructions carefully and follow them to avoid injury to persons or damage
to property.
Tips, general notes and recommendations are marked with this
symbol.
Suitable for use with food.
Safety Instructions
Intended Use
• This device is intended for making and processing pasta dough.
• This device should not be used by people (including children) with
impaired sensory or mental faculties or who do not have adequate
experience and/or knowledge of such devices, unless they are
supervised by a person responsible for their safety, or have received
instructions from such a person on how to use the device. Children must
be supervised in order to ensure that they do not play with the device.
• This device is for personal use only. It is not intended for commercial use.
3
• The device must only be used as described in the operating instructions.
Any other use is deemed to be improper.
Danger of Injury
• Please keep the device and packaging material out of the reach of
children and pets.
• The device should not be used if it is damaged.
Notes on Health
• There may still be some production residues on the device. To avoid
harmful effects to your health, clean the device and all accessories
thoroughly before using them for the first time (see the “Cleaning and
Storage” chapter).
• Only use fresh ingredients which have not passed their best-before date.
Danger of Electric Shock
• Never immerse the device, the main plug or the cable in water or liquids.
• Do not place the device near to any sink or wash basin so that the
device, the mains plug and the cable cannot accidentally come into
contact with water.
• Do not touch the device, cable or mains plug with wet hands.
• The device should only be used in closed rooms.
Set-up and Connection
• Place the device on a stable, firm surface.
• Maintain a sufficient distance from heat sources such as hobs or ovens
in order not to damage the device.
• The device should only be connected to a properly installed socket
with earthing contacts. The socket must also be readily accessible after
connection. The mains voltage must match the technical data for the
device (see the “Technical Data” chapter). Only use suitable extension
cables whose technical data is the same as that of the device.
• Ensure that it is not possible for others to trip over the connected mains
4
cable. Do not allow the cable to hang over the edge of tables or kitchen
counters. Others may become caught and pull the device down.
• Position the cable in such a way that it does not become squashed or
bent and does not come into contact with hot surfaces.
• Do not expose the device to extreme temperatures, strong temperature
fluctuations, direct sunlight or moisture.
Notes on Use
• Always check the device for damage before putting it into operation.
If the device, cable or plug shows visible signs of damage, the device
must not be used until the damage has been repaired. Do not use the
device if it has malfunctioned or been dropped. In such cases, get the
device checked out by an authorised specialist.
• If the device is broken, do not attempt to repair the device yourself for
your own safety.
• In the event of any damage, please contact a specialist or our customer
service department.
• Do not insert any foreign bodies or body parts into the housing of the
device and never attempt to open the housing of the device yourself in
order to prevent damage to the device.
• Do not insert any foreign bodies or body parts through the slots in the
mixing container in order to prevent damage to the device.
• Do not introduce any objects into the ventilation slots of the device and
make sure that no objects block the ventilation slots.
• Danger of injury from rotating parts of the device! Keep hair, body parts,
jewelry and clothing away from rotating parts of the device in order to
prevent injuries.
• Only use the device when it is fully assembled. Always make sure that
the lid is placed on correctly as the device will only work properly when
the mixing container lid is placed on correctly.
• Only use accessories which are recommended by the manufacturer in
order to prevent damage to the device.
• Never leave the device unsupervised during operation.
• Do not drop the device or allow it to be knocked violently.
• In the event of damage/faults, switch the device off immediately.
• Remove the mains plug from the mains socket
5
– before changing any accessories,
– if you are not going to use the device over a lengthy period of time,
– if a fault occurs during operation,
– before a thunderstorm,
– before you clean it.
• Always pull the plug and never the cable!
Items Included
• 1 Pasta Maker
• 5 pasta dies: Spaghetti, Fettuccine, Rigatoni, Lasagna, Oriental Noodle
• 1 Sausage Horn
• 1 Measuring Cup
• Instruction Manual
Spaghetti
6
FettucciniRigatoni
Oriental NoodleLasagna
Instruction ManualMeasuring CupSausage Horn
Device Overview
------------------ 1
10 ------------------
9 ------------------
8 ----------------
7 ---------6 -----------------------------
----------------------------- 3
1. Mixing container lid
2. Motor unit
3. Kneading spiral and dough screw conveyor with drive shaft
(inside the mixing container)
4. On/Off switch (square) with the switch positions
EXT (“Extruding” )
OFF (“Off” )
MIX (“Mix”=Mixing/kneading)
5. Mode switch (round) with the switch positions
EXT (“Extruding” )
MIX (“Mix”=Mixing/kneading)
6. Mixing container
7. Pasta dies (inside the locking ring)
8. Locking ring
9. Face plate
10. Locking clip of the mixing container lid
------------------ 2
-------------- 4
-------------- 5
7
Before Initial Use
Before you can use the device, you must:
• unpack the items supplied,
• clean the device and accessories.
Unpacking
CAUTION!
• Keep children and animals away from the packaging material. There is a
danger of suffocation!
Unpack all parts and check the items supplied to make sure they are
complete (see the “Items Supplied” chapter); also check for transport
damage. If you find any damage to the components, do not use them (!),
but contact our customer service department.
Cleaning
There may still be some production residues on the device. To avoid harmful
effects to your health, clean the device and all accessories thoroughly before
using them for the first time (see the “Cleaning and Storage” chapter).
Assembly
CAUTION!
• The device should only be used when it is fully and correctly assembled
in order to prevent damage to the device.
• Always assemble the device in full before you connect it to the mains
power.
8
How to Assemble
Make sure your machine is unplugged before assembly.
1
SQUARE BUTTON:
EXT (Extrude) means pushing mix through the die.
MIX on your switch means to blend together.
OFF on your switch means off.
ROUND BUTTON tells you what MODE the device
is in. Always set the MODE to MIX first, then move the
SQUARE BUTTON to MIX. Likewise for the EXT functions.
3
White Screw
Face Plate
2
4
Mixing Bin
Base
Place mixing bin all the way onto the base.
The machine will not work if the mixing bin is not
flush against back wall of base.
Mixing Blades
Put the white screw through the face plate
all the way.
Slip the mixing blade onto the white screw shaft
by lining up the grooves in the white screw shaft
and the mixing blade.
9
How to Assemble (cont.)
5
Insert the mixing assembly loosely into the mixing
bin, with the shaft going into the hole in the base.
7
Front Tab
Hole in Base
Front of Bin
6
Locked
Line up the face plate dots (position 1), push the
mixing assembly fully in, and turn the face plate to
the right (position 2), matching up both lower dots.
8
Note – The front tab on the lid locks the front
of the bin. The lid must be securely closed for
safe operation of the machine.
Be sure the white screw is all the way in.
910
Select a pasta die and slide it onto the face plate.
Match the 6 notches. Sausage horns are inserted
into the locking ring before being attached to the
machine.
Screw the locking ring over the pasta die or sausage
horn to secure it. You’re ready to make fresh pasta or
homemade sausage.
Front View
Side View
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.