Ronbow Wall Cabinet User Manual

CONTEMPORARY STYLE WALL CABINET 12”

INSTALLATION SHEET ACCESSORIESMODEL: 687332

Minimum to Ceiling

1”

STEP 1: Determine the ideal location of your

new wall cabinet. Make sure the cabinet has
enough clearance from the faucet and ceiling.

See Figure 1.

Figure 1.

Minimum to Faucet

1”

A

Remove the sliding door by pushing

the hardware clips on top and bottom.

See Figure 2.

Figure 2.STEP 2:

Detail A

Push

RONBOW CORPINSTALLATION GUIDE ronbow.com

CONTEMPORARY STYLE WALL CABINET 12”

INSTALLATION SHEET ACCESSORIESMODEL: 687332

STEP 3:

Measure and drill four holes inside

the cabinets on the top and bottom.

It is strongly recommended the cabinet is
mounted to studs with the wood screws
provided. If studs are not available, it is
recommended to use anchors that support
up to 60 LBS.

See Figure 3.

Figure 3.

3"

3"

12"

STEP 4: Position the cabinet at the location

determined in step 1. Secure the wood screws
through the cabinet.

If anchors are used then position the anchors
in the correct location before fastening the
screws.

See Figure 4.

Figure 4.

RONBOW CORPINSTALLATION GUIDE ronbow.com