Ronbow Solis User Manual

SOLIS

Installation Sheet

15”

Model:

Note :

Step 1 :

Step 2 :

Mounting ring

Step 3 :

033615

DO NOT USE any adhesives with silicone.

Silicone will bond to the decorative finish
and cause permanent damage

Position and drill a 1-3/4” hole for the
drain on the countertop

Place mounting ring under the sink as
shown on the right

Mounting Ring Detail

Rubber
washer

Vertical viewHorizontial view

Bottom O-Ring

Drain Cap

Thick rubber
washer

Metal Nut

T

ailpiece

Drain assembly picture

Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

Thick rubber
washer

Metal Nut

Tailpiece

Contempo Collection

Rubberw asher

Mounting Ring

Countertop

Drain

Mounting Ring

P-trap

Step 4 :

From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty

Step 5 :

Step 6 :

Attach p-trap to tailpiece

Secure top to cabinet by
using adhesive caulk

www.ronbow.com

Ronbow Corporation, All Rights Reserved.