INSTALLATION AND CARE GUIDE
30” VENTO LED MIRROR
E095613
VENTO 30” LED Mirror
Model :
E095613
Designed By: PININFARINA | ITALY
PRE-INSTALLATION
Tools Required
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENSED ELECTRICIAN.
WARNING: To reduce the risk of electrical shock, shut o power before wiring the cabinet.
CAUTION: Requires 120V 20AMP circuit.
CAUTION: The LED mirror must be wired to a GFI (ground fault interrupter) circuit breaker when used in
bathrooms and all other locations required by the national electric code.
CIRCUIT BREAKER
Materials Included
4 long screws
1 set of wall cleats
Materials Required
1 2x4 beam
1 electrical box
3 wire nuts
120VAC
20A GFI
Black= Positive
White = Negative
Green= Ground
FIELD CONNECTION
LED MIRROR CABINET
Black= Positive
LED
White = Negative
Green= Ground
1
161019ronbow.eu | ronbow.comINSTALLATION SHEET
VENTO 30” LED Mirror
Model :
E095613
INSTALLATION
Step 1:
Step 2:
Determine the ideal location of your
new mirror. Make sure mirror has
enough clearance from faucet
and ceiling.
See Figure 1.
Determine the location of wall cleats.
Make sure to use the leveling tool to
ensure the pilot holes are level.
Figure 1.
Minimum to Ceiling1”
Minimum to Faucet
1”
Designed By: PININFARINA | ITALY
Step 3:
Drill pilot holes into the wall.
NOTE: It is highly recommended
to include a 2x4 horizontal beam
between 2 studs to add stability.
Front notch the 2 studs and place
the 2x4 beam between the studs.
See Figure 2.
Fasten the screws provided into the
wall to secure the wall cleat.
Figure 2.
2
161019ronbow.eu | ronbow.comINSTALLATION SHEET
VENTO 30” LED Mirror
Model :
Step 4:
Step 5:
E095613
Cut an opening in the wall and connect
the electrical wires to the housing.
NOTE: Run electrical wires to
the opening. An electrical box is
recommended inside the opening.
See Figure 3.
Secure the cleats in the back of the
mirror to the wall cleat. Hide all wires
in the opening.
Designed By: PININFARINA | ITALY
Figure 3.
3
161019ronbow.eu | ronbow.comINSTALLATION SHEET
VENTO 30” LED Mirror
Model :
E095613
Designed By: PININFARINA | ITALY
PRODUCT CARE AND MAINTENANCE
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at (510) 713-1188.
Wood Surfaces
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
Recommended Products
• Pledge Orange Oil, or similar
• Orange-Glo Wood Cleaner
DISCLAIMERS: Wood naturally ages, darkens and changes color over time due to several environmental conditions that may cause materials to vary from their
original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and may
be significant over a long period of time. The eectiveness of cleaning Ronbow product is dependant on various factors that include sunlight, smoke, moisture,
household cleaners and/or amount of cleaning product used over time. Ronbow cannot guarantee that the above Product Care & Maintenance methods will
eectively clean your product.
4
161019ronbow.eu | ronbow.comINSTALLATION SHEET
161019
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388
ronbow.eu | ronbow.com
Loading...