INSTALLATION AND CARE GUIDE
SINK
Sinktop
SINK Sinktop Without Overflow
Model :
E012427
E012428
E032439
E042431
E042447
E052431
E052463
E062730
PRE-INSTALLATION
Tools Required
MATERIALS REQUIRED
1 drain
E072435
E072443
E082520
E092830
E092842
1
REV. 160811ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Sinktop Without Overflow
Model :
E012427
E012428
E032439
E042431
INSTALLATION
Step 1:
Step 2:
Place adhesive around top of cabinet.
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
See Figure 2.
E042447
E052431
E052463
E062730
E072435
E072443
E082520
E092830
E092842
Figure 1.
adhesive caulking
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Step 3:
Step 4:
From under the drain, insert the
thick rubber washer, screw on and
tighten the metal nut. Romove excess
plumbers’ putty.
See Figure 3.
Attach p-trap to tailpiece.
Figure 3.
sinktop
Drain
Drain Nut
Tailpiece
Metal Nut
Tailpiece
Thick rubber
w
asher
P-tr
ap
2
REV. 160811ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Sinktop Without Overflow
Model :
E012427
E012428
E032439
E042431
E042447
E052431
E052463
E062730
E072435
E072443
E082520
E092830
E092842
PRODUCT CARE AND MAINTENANCE
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at (510) 713-1188.
Ceramic Sinks
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
Recommended Products
• Bar Keeper’s Friend
• Household Vinegar
• Propietary Bathroom Cleaning Products
DISCLAIMERS:
amounts of cleansers. Because of these many dierent conditions, Ronbow cannot guarantee that the above
eectively clean your product.
Eectiveness of cleaning your Ronbow products is dependent on various factors that include: water temperature, concentration and/or
Product Care & Maintenance methods will
3
REV. 160811ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Sinktop Without Overflow
Model :
E012427
E012428
E032439
E042431
E042447
E052431
E052463
E062730
E072435
E072443
E082520
E092830
E092842
Solid Surface Sinks
• After applying recommended cleaning products, wipe surfaces clean and rinse completely with water
immediately
• Use mild cleaning solution only, Strong, abrasive cleaners are not recommended, and can damage surface.
Do not allow cleaner to soak.
• Use a soft, dampened sponge or cloth. Never use an abrasive materials such as a brushed or scouring pad
to clean surface.
• Always test your cleaning solution on a inconspicuous area before apply to the entire surface.
• Hot pans, electric frying pans, waffle irons, crock-pots, and other heat-generating appliances can damage
the surface. To prevent heat damager, always use a trivet with rubber feet between the appliance and the
countertop.
• Avoid exposing solid surface to strong chemicals, such as paint removers, oven cleaner, ect. If contact
occurs, quickly flush the surface with water.
• Remove nail polish with a non-acetone-based nail polish remover and flush with water.
• Do not cut directly on your solid surface countertop. Cutting directly on it will damage the surface.
• Run cold water when pouring boiling water into sinks
• Soapy water and a sponge will remove most stains. Do not use 409 or Fantastik.
• For more stubborn stains use a blue scotch-brite pad and Soft-Scrub.
Recommended Products
• Propietary Bathroom Cleaning Products
DISCLAIMERS:
amounts of cleansers. Because of these many dierent conditions, Ronbow cannot guarantee that the above
eectively clean your product.
Eectiveness of cleaning your Ronbow products is dependent on various factors that include: water temperature, concentration and/or
Product Care & Maintenance methods will
4
REV. 160811ronbow.eu | ronbow.comINSTALLATION SHEET
160811
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388
ronbow.eu | ronbow.com
INSTALLATION AND CARE GUIDE
SINK
Drop-In
SINK Drop-In / Self-Rimming
Model :
E072443
E022101
E022102
E022105
E082520
E012002
E092830
E092842
PRE-INSTALLATION
Tools Required
MATERIALS REQUIRED
1 drain
1
170920ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Drop-In / Self-Rimming
Model :
E072443
E022101
E022102
E022105
INSTALLATION
Step 1:
Step 2:
Position countertop opening to
ensure clearance between the
lavatory, faucet, and backsplash. Cut
an opening per provided template.
Set sink and seal with silicone
or caulking.
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
E082520
E012002
E092830
E092842
Figure 1.
Figure 2.
countertop
Drain Cap
Thick rubber
washer
Step 3:
Note: There mahy be a small beveled
rubber washer packaged with your
drain, please discard this and use
plumbers’ putty instead.
See Figure 2.
From under the drain, insert the
thick rubber washer, screw on and
tighten the metal nut. Romove excess
plumbers’ putty.
See Figure 3.
Figure 3.
Drain Nut
Metal Nut
Tailpiece
Drain Cap
Thick rubber
washer
Step 4:
Attach p-trap to tailpiece.
Tailpiece
P-trap
2
170920ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Drop-In / Self-Rimming
Model :
E072443
E022101
E022102
E022105
E082520
E012002
E092830
E092842
PRODUCT CARE AND MAINTENANCE
The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to
protect against normal home use. With proper care, your product will provide years of use and beauty
in your home.
General Care Tips
• Test cleaning product on small, discrete area prior to applying to entire surface.
• Wipe surfaces frequently with dry, soft, non-abrasive and lint-free towel.
• Do not allow liquids and moisture to accumulate on the surface of products.
• For warranty information, please visit our website at www.ronbow.com or contact the Customer Service
Department at (510) 713-1188.
Ceramic Sinks
• If a spill occurs, clean and dry the surface immediately as liquid can soak through the surface and cause
greater damage.
• Do not place in direct sunlight. Exposure to sunlight may affect the appearance of your vanity, and the
finish will eventually crack.
• Keep away from direct sources of extreme temperatures as heat, cold or moisture from humidity.
Color changes, or blemishes in the wood can occur if recommended care of is not met. Try to avoid
these extremes.
• Most wood surfaces can be cleaned, or dusted, with any commercial wood cleaning product. For general
cleaning, use a non-abrasive, or lint-free cloth while dusting along the wood grain to preserve the
wood’s chacteristics.
Recommended Products
• Bar Keeper’s Friend
• Household Vinegar
• Propietary Bathroom Cleaning Products
DISCLAIMERS:
amounts of cleansers. Because of these many dierent conditions, Ronbow cannot guarantee that the above
eectively clean your product.
Eectiveness of cleaning your Ronbow products is dependent on various factors that include: water temperature, concentration and/or
Product Care & Maintenance methods will
3
170920ronbow.eu | ronbow.comINSTALLATION SHEET
SINK Drop-In / Self-Rimming
Model :
E072443
E022101
E022102
E022105
E082520
E012002
E092830
E092842
Solid Surface Sinks
• After applying recommended cleaning products, wipe surfaces clean and rinse completely with water
immediately
• Use mild cleaning solution only, Strong, abrasive cleaners are not recommended, and can damage surface.
Do not allow cleaner to soak.
• Use a soft, dampened sponge or cloth. Never use an abrasive materials such as a brushed or scouring pad
to clean surface.
• Always test your cleaning solution on a inconspicuous area before apply to the entire surface.
• Hot pans, electric frying pans, waffle irons, crock-pots, and other heat-generating appliances can damage
the surface. To prevent heat damager, always use a trivet with rubber feet between the appliance and the
countertop.
• Avoid exposing solid surface to strong chemicals, such as paint removers, oven cleaner, ect. If contact
occurs, quickly flush the surface with water.
• Remove nail polish with a non-acetone-based nail polish remover and flush with water.
• Do not cut directly on your solid surface countertop. Cutting directly on it will damage the surface.
• Run cold water when pouring boiling water into sinks
• Soapy water and a sponge will remove most stains. Do not use 409 or Fantastik.
• For more stubborn stains use a blue scotch-brite pad and Soft-Scrub.
Recommended Products
• Propietary Bathroom Cleaning Products
DISCLAIMERS:
amounts of cleansers. Because of these many dierent conditions, Ronbow cannot guarantee that the above
eectively clean your product.
Eectiveness of cleaning your Ronbow products is dependent on various factors that include: water temperature, concentration and/or
Product Care & Maintenance methods will
4
170920ronbow.eu | ronbow.comINSTALLATION SHEET
170920
40650 Encyclopedia Circle
Fremont, CA 94538
T 510.713.1188
F 510.657.9388
ronbow.eu | ronbow.com
Loading...