KENDRA 23" / 31" / 36"
INSTALLATION SHEET
MODEL: 038123
038131
038136
NOTE: For installing under counter sink with
counter top.
STEP 1: Apply adhesive caulking around the
topside of rim near the edge. Carefully raise
sink in place, align, and press firmly.
See Figure 1.
STEP 2:
lavatory in place
Attach 4 undermount-clips to hold
See Figure 2.
CONTEMPO COLLECTION
Figure 1.
Back Splash
Adhesive Caulking
Counter Top
Figure 2.
STEP 3:
by using adhesive caulk
Secure top & back splash to cabinet
See Figure 3.
Undermount Clip
Figure 3.
adhesive caulking
INSTALLATION GUIDE REV. 061915
ronbow.com
KENDRA 23" / 31" / 36"
INSTALLATION SHEET
MODEL: 038123
038131
038136
STEP 4: Attach p-trap to tailpiece.
See Figure 4.
CONTEMPO COLLECTION
Figure 4.
Drain
Thick Rubber Washer
Drain Nut
Tailpiece
P-Trap
INSTALLATION GUIDE REV. 061915ronbow.com
KENDRA 23" / 31" / 36"
INSTALLATION SHEET
MODEL: 038123
038131
038136
NOTE: For installing under counter sink with
WideAppeal Top.
STEP 1: DO NOT DISCARD WOODEN
INSTALLATION BRACKET!
• Make sure wooden installation bracket is
safely secure
• Install under counter sink by following
specific sink installation
See Figure 1.
STEP 2:
• For best results, clean the mounting
• surfaces with a dry cleaning cloth
• To prevent over flow of adhesive, use
masking tape to tape o the edges of the
Figure 1.
Figure 2.
adhesive caulking
Adhesive Caulking
CONTEMPO COLLECTION
1. Wooden Installation Bracket
!
2. Undercounter Sink
STEP 3: Apply adhesive on wood bracket and
mounting surfaces of the cabinet
See Figure 2.
Figure 3.
STEP 4: Carefully place countertop on to the
cabinet, align, and press firmly
See Figure 3.
INSTALLATION GUIDE REV. 061915ronbow.com
KENDRA 23" / 31" / 36"
INSTALLATION SHEET
MODEL: 038123
038131
038136
STEP 5: Attach p-trap to tailpiece.
See Figure 4.
CONTEMPO COLLECTION
Figure 4.
Drain
Thick Rubber Washer
Drain Nut
Tailpiece
P-Trap
INSTALLATION GUIDE REV. 061915ronbow.com
KENDRA 23" / 31" / 36"
INSTALLATION SHEET
MODEL: 038123
038131
038136
NOTE: For installing Ceramic Sinktop.
STEP 1: Place adhesive around top of cabinet.
See Figure 1.
STEP 2:
plumbers' putty under drain cap and insert
whole drain body inside the bowl and through
the countertop.
Place a generous portion of
CONTEMPO COLLECTION
Figure 1.
Figure 2.
Drain Cap
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers' putty
instead.)
See Figure 2.
STEP 3:
think rubber washer and screw on and tighten
the metal nut. Remove excess plumbers' putty.
From under the drain, insert the
See Figure 3.
STEP 4:
Attach p-trap to tailpiece.
Figure 3.
Overflow Hole
Drain
Drain Nut
Thick Rubber
Washer
Metal Nut
Tailpiece
Thick Rubber Washer
INSTALLATION GUIDE REV. 061915ronbow.com
Tailpiece
P-Trap
Loading...