Ronbow Overhang Ceramic Vessel User Manual

Ceramic Vessel

Installation Sheet

Model:

Step 1 :

Step 2 :

Step 3 :

218132
218147

Place adhesive around top of cabinet

Position and set vanity top on cabinet

See Figure 1.

Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

See Figure 2.

Sinktop

Figure 1.

Figure 2.

Drain Cap

Overflow hole

Thick rubber
washer

Step 4 :

Step 5 :

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece.

Figure 3.

Drain

Drain Nut

Tailpiece

Metal Nut

Tailpiece

Thick rubber
washer

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.