Ronbow Oval Ceramic Vessel User Manual

Ceramic Vessel

Installation Sheet

Model:

Step 1 :

Step 2 :

Step 3 :

218023-1
218023-8

Place silicon pads on cabinet (optional)
Place adhesive around top of cabinet

See Figure 1.

Position and set vanity top on cabinet

See Figure 1.

Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

Self-Rimming Sinks

Sinktop

Figure 1.

silicon pad silicon pad

Figure 2.

Drain Cap

Overflow hole

Thick rubber
washer

Step 4 :

Step 5 :

See Figure 2.

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece.

Figure 3.

Drain

Drain Nut

Tailpiece

Metal Nut

Tailpiece

Thick rubber
washer

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.