Ronbow Metal Feet User Manual

MEtAL fEEt

705002
705003

MATERIALS NEEDED:

(4) nails
hammer
PhilliPs screwdriver

STEP 1:

Optional metal feet are installed on the

705005
705006
705008

705009
705067

MATERIAL PROVIDED:

(4) metal feet
(4) screws

bottom of the vanity legs. It will add extra height to the
vanity.

See Figure 1.

INSTALLATION SHeeT

Figure 1.

ACCESSORIESMODEL: 705001

metal feet

STEP 2:

Place the metal feet flush against the bottom

of the leg and tighten the screw provided.

See Figure 2.

STEP 3:

metal feet to prevent the feet from coming loose.

It is recommended to nail the corner of the

See Figure 3.

STEP 4:

metal feet.

Repeat steps 2 and 3 to install the set of

Figure 2.

Figure 3.

metal feet

BOttOm Of
the leG

metal feet

BOttOm Of
the leG

Rev. NOv, 2013ronbow.comINSTALLATION GUIDe