KARA
Installation Sheet
25”/31”/37”/49”
Model:
Step 1 :
Step 2 :
Step 3 :
212225
212231
212237
212249
Place adhesive around top of cabinet
Position and set vanity top on cabinet
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
Ceramic Sinktop
Figure 1.
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Step 4 :
Step 5 :
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Figure 3.
Drain
Drain Nut
Tailpiece
Metal Nut
Tailpiece
Thick rubber
washer
P-trap
www.ronbow.com
Ronbow Corporation, All Rights Reserved.