EVIN
Installation Sheet
24”/32”/37”
Model:
Step 1 :
Step 3 :
216624
216632
216637
Position countertop opening to ensure
clearance between the lavatory , faucet
and backsplash. Cut 21”w x 17”h (max)
opening in countertop. Position and set
sink and seal with silicone adhesives or
caulking
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
Self-Rimming Ceramic Vessel
Ceramic Sinktop
Figure 1.
countertop
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Metal Nut
Tailpiece
Step 4 :
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Step 5 :
Attach p-trap to tailpiece.
www.ronbow.com
Figure 3.
Drain
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Ronbow Corporation, All Rights Reserved.