Ronbow Cami User Manual
CAMI
Installation Sheet
18”
Model:
Note :
Step 1 :
Mounting ring
Step 2 :
036918
For installing above counter sink.
DO NOT USE any adhesives with silicone.
Silicone will bond to the decorative finish
and cause permanent damage.
Position and drill a 1-3/4” hole for the
drain on the countertop. Place mounting
ring under the sink as shown on the
right
Mounting Ring Detail
Rubber
washer
Vertical viewHorizontial view
Bottom O-Ring
Drain Cap
Thick rubber
washer
Metal Nut
T
ailpiece
Drain assembly picture
Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
Thick rubber
washer
Metal Nut
Tailpiece
Contempo Collection
Rubberw asher
Mounting Ring
Countertop
Drain
Mounting Ring
P-trap
Step 3 :
From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty and attach p-trap to tailpiece
Step 4 :
Secure top & back splash to cabinet by
using adhesive caulk
www.ronbow.com
Ronbow Corporation, All Rights Reserved.
CAMI
Installation Sheet
18”
Model:
Note :
Step 1 :
Step 3 :
036918
For installing Ceramic Sinktop
Place adhesive around top of cabinet
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
Contempo Collection
Figure 1.
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Metal Nut
Step 4 :
Step 5 :
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece
Figure 3.
Drain
Drain Nut
Tailpiece
Tailpiece
Thick rubber
washer
P-trap
www.ronbow.com
Ronbow Corporation, All Rights Reserved.
Loading...