Ronbow Angelica User Manual

ANGELICA 23”

Note :

step 1 :

step 2 :

Mounting ring

step 3 :

INSTALLATION SHEET

DO NOT USE any adhesives with silicone.
Silicone will bond to the decorative finish
and cause permanent damage

Position and drill a 1-3/4” hole for the
drain on the countertop

Place mounting ring under the sink as
shown on the right

Mounting Ring Detail

Rubber
washer

Vertical viewHorizontial view

Bottom O-Ring

Drain Cap

Thick rubber
washer

Metal Nut

T

ailpiece

Drain assembly picture

Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

Thick rubber
washer

Metal Nut

Tailpiece

Neo-classic cllectionMODEL: 057223

Rubber washer

Mounting Ring

Countertop

Drain

Mounting Ring

P-trap

step 4 :

step 5 :

step 6 :

From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty

Attach p-trap to tailpiece

Secure top to cabinet by
using adhesive caulk

RONBOW CORPINSTALLATION GUIDE ronbow.com