ADARA
Installation Sheet
31”/47”
Model :
Step 1 :
Step 2 :
Step 3 :
053831
053847
Sink :
218132
218147
Place adhesive around top of cabinet
Position and set vanity top on cabinet
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
Neo-Classic Collection
Figure 1.
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Step 4 :
Step 5 :
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Figure 3.
Drain
Drain Nut
Tailpiece
Metal Nut
Tailpiece
Thick rubber
washer
P-trap
www.ronbow.com
Ronbow Corporation, All Rights Reserved.