Ronbow 616025 User Manual
Installation Sheet
Medicine Cabinet Installation: Recess Mount
1
Wall
Using a pencil and a level draw the perimeter
of the backside of the cabinet in desired wall
location.
4 5
Wall
2 3
Cut a hole along the drawn perimeter using
appropriate tools.
Wall
Wall
width
height
Create a frame using frame studs and frame
blocks that would fit the width and height of
the backside of your medicine cabinet.
6
Wall
Carefully complete the frame with studs and
frame blocks inside the cutout, making sure
that edges align.
Place an appropriate amount of wood glue
on the inner sides of the frame. Position the
cabinet into the cutout and into the frame.
The finished installation should have the
medicine cabinet front concealing the edges
of your wall cutout.
RONBOW Materials Corp., All Rights Reserved.
Installation Sheet
Medicine Cabinet Installation: Surface Mount
1
Have the door of your medicine cabinet open.
Carefully drill four holes near the four corners
of your medicine cabinet
2
With a level, position your medicine cabinet to
your desired wall location. Align and drill holes
into the wall that matches the drilled holes of
your medicine cabinet. Secure your medicine
cabinet using four Hollow Wall Anchors.
Wall
RONBOW Materials Corp., All Rights Reserved.
Loading...