Ronbow 420202-G05 User Manual

Tempered Glass Vessel

Installation Sheet

Model:

Note :

Step 1 :

Step 2 :

420101
420102
420201
420301

420306
420520
420521
420522

420523
420527
420529
420819

Above Counter Sinks

DO NOT USE any adhesives with silicone. Silicone will bond to the decorative finish and
cause permanent damage

Position and drill a 1-3/4” hole for the
drain on the countertop

Rubber Washer

Place mounting ring under the sink as
shown on the right

Mounting Ring Detail

Rubber
washer

Vertical viewHorizontial view

Mounting Ring

Countertop

Drain Cap

Step 3 :

Step 4 :

Step 5 :

Mounting ring

Bottom O-Ring

Drain assembly picture

Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty

Attach p-trap to tailpiece

Thick rubber
washer

Metal Nut

Tailpiece

Thick rubber
washer

Metal Nut

T

ailpiece

Dr

Mounting Ring

ain

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.