Ronbow 350418-CW User Manual

Stone Vessel

Installation Sheet

Model:

350418-CW

Note : For Stone Sinks without overflow

Step 1 :

Step 2 :

Position countertop drain opening to
ensure clearance between the lavatory,
faucet & backsplash. Cut 1-3/4” hole
for drain in countertop

See Figure 1.

Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.

(There may be a small beveled rubber washer
packaged with your drain, please discard this
and use plumbers’ putty instead)

See Figure 2.

Above Counter Sinks

Figure 1.

Figure 2.

Drain Cap

Thick rubber
washer

Metal Nut

Step 3 :

Step 4 :

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece.

Figure 3.

Metal Nut

Tailpiece

Tailpiece

Drain

Thick rubber
washer

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.