Ronbow 200390 User Manual
Ceramic Vessel
Installation Sheet
Model:
Step 1 :
Step 2 :
200390
Position countertop opening to ensure
clearance between the lavatory,
faucet, and backsplash. Cut counter
top opening and cut-out max 141/4” Diameter. Set sink and seal with
silicone or caulking
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
Self-Rimming Sinks
Figure 1.
countertop
Figure 2.
Drain Cap
Overflow hole
Thick rubber
washer
Metal Nut
Step 3 :
Step 4 :
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Figure 3.
Drain
Drain Nut
Tailpiece
Tailpiece
Thick rubber
washer
www.ronbow.com
P-trap
Ronbow Corporation, All Rights Reserved.
Loading...