Ronbow 200271 User Manual

CERAMIC VESSEL

INSTALLATION SHEET

217724 217737

Note: For ceramic sinks with overflow & faucet deck

STEP 1: Place adhesive around top of cabinet

OR

Position countertop opening to ensure
clearance between the lavatory, faucet and
backsplash.

Note: If using a custom top, position and drill a 7
inch hole in the counter top.

See Figure 1.

STEP 2: Place a generous portion of plumb-

ers' putty under drain cap and insert whole
drain body inside the bowl and through the
countertop.

Figure 1.

Figure 2.

Overflow Hole

ABOVE COUNTER SINKSMODEL: 200271 217732

Drain Cap

Thick Rubber
Washer

Metal Nut

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers' putty in­stead.)

See Figure 2.

STEP 3: From under the drain, insert the thick

rubber washer and screw on and tighten the
metal nut. Remove excess plumbers' putty.

See Figure 3.

STEP 4: Attach p-trap to tailpiece.

MATERIALS NEEDED:

PHILIP SCREWDRIVER
PLUMBERS' PUTTY/ SEALANT

Figure 3.

Drain

Drain Nut

Tailpiece

Tailpiece

Thick Rubber Washer

P-Trap

RONBOW CORPINSTALLATION GUIDE ronbow.com