Ronbow 200223 User Manual

Ceramic Vessel

Installation Sheet

Model:

Note :

Step 1 :

Step 2 :

200223

For Ceramic Sinks with overflow &
Faucet Deck

Position countertop opening to ensure
clearance between the lavatory, faucet
and backsplash.
Position and drill a 6-11/16” hole in the
countertop

See Figure 1.

Apply a continuous bead of silicon
sealant (Not Provided) around the
edge of the countertop cutout.
Position the lavatory on the
countertop. Press down firmly on the
lavatory. Apply a thin bead of silicone
sealant (Not Provided) where the
lavatory meets the countertop

See Figure 2.

Above Counter Sinks

Figure 1.

countertop

Figure 2.

Cutout

Apply sealant

Step 3 :

Step 4 :

Step 5 :

If using RONBOW drain, place a
generous portion of plumbers’ putty
(Not Provided) under drain cap and
insert whole drain body inside the
bowl and through the countertop

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

See Figure 3.

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove exess
plumbers’ putty

See Figure 3.

Connect the trap to the drain. Run
water into the lavatory. Check all
connections for leaks

Figure 3.

Drain

Drain Nut

Tailpiece

Plumbers Putty

Thick rubber
washer

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.