Ronbow 200108 User Manual

Ceramic Vessel

Installation Sheet

Model:

200102
200104
200108

Note : For Ceramic Sinks with overflow

Step 1 :

Step 2 :

Position countertop opening to ensure
clearance between the lavatory, faucet
and backsplash.
Position and drill a 7 inch hole in the
countertop

See Figure 1.

Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop

Figure 1.

countertop

Figure 2.

Overflow hole

Above Counter Sinks

example

7”

Drain Cap

Thick rubber
washer

Step 3 :

Step 4 :

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

See Figure 2.

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece

Figure 3.

Drain

Drain Nut

Tailpiece

Metal Nut

Tailpiece

Thick rubber
washer

www.ronbow.com

P-trap

Ronbow Corporation, All Rights Reserved.