Ronbow 200052 User Manual

Ceramic Vessel

Installation Sheet

Model:

200003
200004
200005
200006

200007
200008
200033
200034

200036
200051
200052

Note : For Ceramic Sinks without overflow

Step 1 :

Step 2 :

Position countertop opening to ensure
clearance between the lavatory, faucet
and backsplash. Cut 1-3/4” hole for
drain in countertop

See Figure 1.

Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop

(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)

Figure 1.

Figure 2.

Above Counter Sinks

Drain Cap

Thick rubber
washer

Metal Nut

Step 3 :

Step 4 :

See Figure 2.

From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece

Figure 3

Drain Nut

Tailpiece

Tailpiece

Drain

Thick rubber
washer

P-trap

www.ronbow.com

Ronbow Corporation, All Rights Reserved.