What's in the box?
1 - Made in USA SS412
1 - This owners manual
0 - Power supply (its an all passive unit)
SS412 Source Selector
3
2
www.rolls.com
MADE IN USA
SOURCE SELECTOR
1
SS412
4
IN 4
4
3
2
1
SS412
MADE IN USA
OUT
SPECIFICATIONS:
IN Connectors: 4 - RCA, 1 - 1/8" TRS Stereo
OUT Connectors: RCA
Size: 5.5"w x 3.1"d x 1.6"h
Passive design, NO power, NO electronics and NO distortion.
Thick powder coated steel chassis.
Four pairs of inputs and one pair of outputs with gold plated RCA jacks.
High quality Bosin potentiometer used for precise volume adjustment.
100% Handcrafted in Salt Lake City, UT.
Rolls Corporation
Salt Lake City, UT
8/18
Thank you for purchasing the SS412. We sincerely appreciate the opportunity to build a product for you and participate
in your love of quality music and sound. We love what we do
and we’re happy to help. Rolls products are hand built in Salt
Lake City, Utah by people who care about high quality audio.
The SS412 source selector is a completely passive design
with absolutely nothing added to your audio signal path.
That means NO power required, NO electronics used and
NO distortion will ever be added.
The chassis is made from .090" steel, meaning it is 3 times
thicker than most chassis. Four pairs of RCA inputs allow for
connection to all your sources, and one pair of RCA jacks to
go to your amplier.
3
2
www.rolls.com
MADE IN USA
SOURCE SELECTOR
1
SS412
4
IN 4
Connection of the SS412 is easy. The rear panel 1-4 RCA's
connect your input source signals. The OUT RCA on the rear
panel goes to your amplier or other device. Volume knob
sets the level of the selected signal from the "1-4" front panel
switch.
The IN 4 on the front is a 3.5mm (1/8") stereo input in parallel with RCA input #4 on the rear of the unit. It is a great way
to plug your phone into your system without needing access
to the back of the unit.
All this and it is 100% Handcrafted in Salt Lake City, UT.
SS412
MADE IN USA
4
3
2
1
OUT