Rolls SE162 User Manual
12 - 16
VDC
PWR
DEFINITION
OUTPUT
SE162
RED SQUARE
LIMITED WARRANTY
This product is warranted to the original consumer purchaser to
be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase
as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be
limited to repair or replacement (at our option), during the warranty period
of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls
Corporation, TRANSPOR T A TION CHARGES PREP AID. Products returned
to us or to an authorized Service Center must be accompanied by a copy of
the purchase receipt. In the absence of such purchase receipt, the warranty
period shall be one (1) year from the date of manufacture.
This warranty shall be invalid if the product is damaged as a
result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair,
alteration or maintenance by any person or party other than our own service
facility or an authorized Service Center, or any use violative of instructions
furnished by us.
This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURA TION TO THE ONE
YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. Some
states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
WHATSOEVER. Some states do not allow the exclusion or limitation of
special, incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
D.I. / Sonic Exciter
INPUT
RED
SQ U A R E
D.I. / EX C IT E R
BOTTOM
INPUT
SE162
ACTIVE
SE162 RED SQU ARE
• Direct Box and Sonic Exciter all in
one compact package
"Definition" Control for crisp highs
•
•
"Bottom" Control for a big bass sound
The SE162 is an impedance matching device
with a unique and usefull addition - sonic
excitment. It was designed by sound engineers
who desired a way to take signals that may
need some frequency loss compensation, and
send the purified signals down long lines.
Rolls Corporation
Salt Lake City, UT
2/98
OWNERS MANUAL
Thank you for your purchase of the Rolls SE162 DI/Sonic Exciter. This
product has been designed for years of useful service. We take pride in
our products and appreciate any comments you may have regarding
them. The SE162 takes your program material and adds new life, clarity,
and three dimensionality to your sounds, as well as converting a high
impedance signal to low impedance.
Please read the following manual carefully to ensure proper operation,
and enjoy your new SE162.
INSPECTO N
1. Unpack and Inspect the SE162 package
Your SE162 was carefully packed at the factory in a protective carton.
Nonetheless, be sure to examine the unit and the carton for any signs of
damage that may have occurred during shipping. If obvious physical
damage is noticed, contact the carrier immediately to make a damage
claim. We suggest saving the shipping carton and packing materials for
safely transporting the unit in the future.
2. Please complete the Warranty Registration Card and return it to the
factory.
DESCRIPTION
ACTIVE SWITCH: Engages and disengages the SE162 process. When
out, the unit is bypassed.
INPUT: Controls the level of input signal.
BOTTOM: Controls the low frequency cut/boost (flat or no cut/boost is at
about 11’clock). There is a 0 to 1/2 turn spectrum spread from mid-range
to bass with this control as well as amplitude control.
DEFINITION: Controls the amount of sonic clarity and sound spread.
Setting it on 0 is flat response and minimal spread, on 10 is maximum
spread and definition.
PWR LED: Indicates that the RP262 is connected to an AC outlet, and
the power is turned on.
INPUT
OUTPUT
12 - 16
VDC
INPUT: Unbalanced 1/4" T-S input for connection to the output of an
instrument preamplifier or other line level output.
OUTPUT: XLR balanced and 1/4" TS unbalanced output for connection
to a snake, mixer, or power amplifier.
WHAT IS A SONIC EXCITER?
The human ear can detect a frequency range of roughly 20Hz to 20kHz.
However, the frequency response that a normal speaker can effectively
reproduce is much, much less. Additionally, speakers add distortion and
phase changes that make the sound quite different from that of the
original material.
A sonic exciter restores clarity and presence to the processed signal by
correcting phase changes and harmonic structure differences. In other
words, it puts the components of the sound back where they belong.
All of this magic is done by the use of all-pass filtering,
frequency compensated gain adjustment, and compensated frequency
domain delay. What this means to you is the elements of your sound are
fanned out like a deck of cards, making each sound more audible and
distinct, reducing the need for high volume and radical equalizer adjustment.
SPECIFICATIONS
Frequency Response 20 Hz - 40 kHz
Input Impedance 100KΩ unbalanced
THD + Noise <0.03% typical
Noise Floor -78 dB
Indicators Power LED
Active LED
Input/Output jacks XLR balanced output
1/4" unbalanced input and output
Size: 4" x 4" x 1.5"
Weight: 1 lb. (.5 kg)
Power : 12 - 16 VDC 50mA
5 x 1.2 mm DC Jack - Center Negative
ACTIVE
SE162
INPUT
RED
SQ U A R E
D.I. / EXCITER
DEFINITION
BOTTOM
PWR
Loading...