Rolls RPB486 User Manual

LIMITED WARRANTY

This product is warranted to the original consumer purchaser to be free from

period of one (1) year from the date of purchase as shown on the purchaser’s receipt.

The obligation of Rolls Corporation under this warranty shall be limited to

repair or replacement (at our option), during the warranty period of any part which proves

the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PRE-

PAID. Products returned to us or to an authorized Service Center must be accompanied

by a copy of the purchase receipt. In the absence of such purchase receipt, the warranty

period shall be one (1) year from the date of manufacture.

This warranty shall be invalid if the product is damaged as a result of deface-

ment, misuse, abuse, neglect, accident, destruction or alteration of the serial number,

violative of instructions furnished by us.

This one-year warranty is in lieu of all expressed warranties, obligations or li-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WAR-

RANTY. Some states do not allow limitations on how long an implied warranty lasts, so

the above limitation may not apply to you.

IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL

RANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the

tation or exclusion may not apply to you. This warranty gives you specifi c legal rights,

ROLLS CORPORATION

Thank you for your purchase of the ROLLS RPB486 PHANTOM HEX 6 channel

volts of ultra clean phantom power. The outputs are 1/4” Tip-Ring-Sleeve bal-

To eliminate the possibility of any DC voltages, the RPB486 features pull-down

The green LED for each channel lights when that channel is in use. All these

The red PWR led indicates the unit is on.

NOTE: THE FOLLOWING DESCRIPTION APPLIES TO EACH OF THE SIX

track recorder. Note: If you are connecting this to a mixer, adjust the mixer’s gain

6 ea. 1/4” TRS jacks (tip positive)

Weight: 4 lbs.

The output impedance of the RPB486 will be the same as the impedance of your

The RPB486 should be powered up and connected to the

R ev : Đ

S he e t

Đ

B aĐ R PB 6 2 3. S C HĐ

AĐ

+4 8V Đ

R5Đ
100KĐ

J2Đ
PHONE 1/4

Đ

1Đ 2Đ

3Đ

J1Đ

XLR J ACK F

Đ

POWERĐ

+4 8V Đ

D2Đ

1N4001Đ

D1Đ

1N4001Đ

IĐ

1Đ

GĐ

2Đ

O Đ

3Đ

U1Đ

7812Đ

C1Đ

47UFĐ

C6Đ

503Đ

T1Đ

MCI 407 4024Đ

SW3Đ

SW SPSTĐ

R4Đ

100KĐ

C2Đ

47UFĐ

D6Đ

LDSRĐ

C5Đ
470UFĐ

C4Đ
470UFĐ

1Đ 3Đ

2Đ

AC1Đ

AC PLUGĐ

D3Đ
ZD12VĐ

D5Đ
ZD12VĐ

D4Đ
ZD12VĐ

R1Đ

6.8KĐ

R2Đ

6.8KĐ

R3Đ

100Đ

D12Đ

LDLGĐ

C3Đ

47UĐ

+4 8V Đ

100KĐ

PHONE 1/4Đ

1Đ 2Đ

3Đ

J1AĐ

XLR J ACK F

Đ

C1AĐ

47UFĐ

R5AĐ
100KĐ

C2AĐ

47UFĐ

R1AĐ

6.8KĐ

R2AĐ

6.8KĐ

R7Đ

100Đ

D11Đ

LDLGĐ

C3AĐ
47UFĐ

+4 8V Đ

100KĐ

PHONE 1/4Đ

1Đ 2Đ

3Đ

J1BĐ

XLR J ACK F

Đ

C1BĐ

47UFĐ

R5BĐ

100KĐ

C2BĐ

47UFĐ

R1BĐ

6.8KĐ

R2BĐ

6.8KĐ

R8Đ

100Đ

D10Đ

LDLGĐ

C3BĐ

47UFĐ

+4 8V Đ

R5CĐ
100KĐ

J2CĐ
PHONE 1/4Đ

1Đ 2Đ

3Đ

J1CĐ

XLR J ACK F

Đ

C1CĐ

47UFĐ

R4CĐ

100KĐ

C2CĐ

47UFĐ

R1CĐ

6.8KĐ

R2CĐ

6.8KĐ

R9Đ

100Đ

D9Đ

LDLG

Đ

C3CĐ

47UFĐ

+4 8V Đ

R5DĐ
100KĐ

J2DĐ
PHONE 1/4Đ

1Đ 2Đ

3Đ

J1DĐ

XLR J ACK F

Đ

C1DĐ

47UFĐ

R4DĐ

100KĐ

C2DĐ

47UFĐ

R1DĐ

6.8KĐ

R2DĐ

6.8KĐ

R10Đ

100Đ

D8Đ

LDLG

Đ

C3DĐ

47UFĐ

+4 8V Đ

R5EĐ
100KĐ

J2EĐ
PHONE 1/4Đ

1Đ 2Đ

3Đ

J1EĐ

XLR J ACK F

Đ

C1EĐ

47UFĐ

R4EĐ

100KĐ

C2EĐ

47UFĐ

R1EĐ

6.8KĐ

R2EĐ

6.8KĐ

R11Đ

100Đ

D7Đ

LDLG

Đ

C3EĐ

47UFĐ

J2AĐ

J2BĐ

R5AĐ

R5BĐ

R OL L S C O R PO R A TI O N Đ

5 9 68 S ou th 3 50 W es t

Đ

M ur r a y, U T 84 1 0 7Đ

P H AN TO M HE X RP B6 23 Đ

S i ze :

Đ

D oc u me n t N u mb e r: Đ

1 of 1

Đ