Rolls RP220 User Manual

RP220
Dual Tube Mic Preamp
Channel One
GAIN VOLUME
+48V
PHAN
POWER
NORM
-30dB
INPUT
PAD
INST.
INPUT
+38 dB +65
dB 0
- OO
+48V
PHAN
POWER
NORM
-30dB
INPUT
PAD
INST.
INPUT
The RP220 provides clear sonic quality and perfor­mance for the working musician, studio operator or anyone who needs a preamp with the warm, smooth, analog sound. Each channel utiliz es one premium 7025 tube in a unique configuration to give smooth control­lable gain through tr ansformer balanced inputs. The unit has both XLR and 1/4" inputs and outputs with a 30 dB Pad and a Phase Reversal switches to adapt to any performing or studio situation.
WHY TUBES?
Because they sound great! V acuum tube circuits have a natural warming effect on audio signals because the y react differently than solid state devices and will not reproduce sharp transients in the music. The result of adding a Bellari tube processor or preamp to your sig­nal is a smooth round sound. Preamps or signal processors are designed to provide low noise gain or effects to microphones and instru­ments without coloring or distor ting the sound in an unpleasant way. The audio signal can go directly from a Bellari tube processor to the recorder, thus bypass­ing any additional solid state circuits of a mixer.
Channel Two
GAIN VOLUME
+38 dB +65
Tube preamps and processors hav e gained in popularity to counteract the “digital sound” of contemporary digital re­cording equipment which may sound harsh or brittle. Tube processors are utilized b y recording engineers who prefer the “sound” of analog recording equipment, but like the editing and predictability of digital recorders. Bellar i tube processors have a more even harmonic structure, adding that analog touch back to the signal, so they just plain sound better .
SPECIFICATIONS
Frequency Response: 20Hz - 40kHz, +/- 3dB Mic/Line
Input Impedance: 600 balanced XLR
THD: 0.1% typical S/N Ratio: >107 dB Max Gain: 48 dB Inst. or Line, 70 dB Lo w Z Indicators: 5 segment output level
Input/Output jacks: XLR balanced and 1/4” Dimensions: 3.5” x 6” x 19”
P ower: 120 V A C (230 V A C) 15 V A Weight: 7.5 lbs (3.5 kg)
Dual Tube Microphone Preamp
dB 0
- OO
PWR
RP220
5Hz - 40kHz inst.
1M Instrument
Po w er status LED
(89mm x 162mm x 482mm)
120 VAC
50/60 Hz 15 VA
MADE IN U.S.A.
NRTL /C
MODEL RP220
SERIAL NUMBER
220-
CAUTION
RISK OF ELECTRIC SHOCK
WARNING:
OR MOISTURE.
CAUTION:
NOT REMOVE BACK. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISQUE DE CHOC - NE PAS ENLEVER
DO NOT OPEN
DO NOT EXPOSE THIS EQUIPMENT TO RAIN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
OUTPUT
OUTPUT
CHANNEL TWO
NORM
NORM
REV
-30dB
PHASE OUTPUT
LEVEL
CHANNEL ONE
INPUT
OUTPUT
OUTPUT INPUT
NORM
NORM
-30dB
REV
PHASE OUTPUT
LEVEL
Bellari is a division of Rolls Corporation
5143 South Main Street
Salt Lake City, UT 84107
www.rolls.com
Loading...