Page 1
Thank you for your purchase of the Rolls DU30b Mic Preamp Audio
Ducker. This device temporarily and automatically mutes or “ducks” a
background music signal under a paging microphone or other auxiliary signal. After the announcement, the music level is automatically
returned to it’s previous level.
DESCRIPTION
REAR PANEL
MIC IN: Female XLR jack for connection to a dynamic or condenser paging microphone.
PHTM PWR: Jumper for engaging the +12 volt phantom power to
the microphone input - confi gured
OFF from the factory.
AUX IN: Stereo RCA jacks for
connecting to a source different
from the Mic In as the master
signal.
LINE IN: Stereo RCA jack for
connection to the stereo signal
source to be “ducked” such as
a tuner, CD player or cassette
player.
OUTPUT: Stereo RCA jacks for
connection to the system’s amplifi ers.
12 VDC: Power input. Connect
to the enclosed Rolls PS27 AC
adapter.
FRONT PANEL
MIC/LINE: When pressed in, the
gain of the XLR Mic In is reduced
by 30 dB.
RELEASE TIME: Adjusts the
amount of time for the “ducked”
signal to return to its normal level.
Counterclockwise; slow - Clockwise; fast.
MIC LEVEL: Adjusts the amount of gain in the Mic In circuit.
DUCK SENSITIVITY: The Threshold at which “ducking” begins.
When the microphone level reaches the threshold, the signal present at the Line In jacks is reduced until the announcement is over,
then the Line In signal returns to its previous level.
DUCK DEPTH: Adjusts the amount of background signal (or Line
In) reduction - fully counter clockwise the signal is reduced 6 dB,
fully clockwise the signal is reduced 70 dB.
DU30b DUCKER
-
Automatically ducks music under announcements
- Perfect for restaurants and small clubs
- Clean, Quiet Mic Preamp
The DU30b is a microphone preamp and background
music preamp. When an announcement is made into
the microphone, the music is automatically “ducked”
under the announcement. Then the music is brought
back to it’s previous level.
SPECIFICATIONS
Frequency Response 20 Hz - 40 kHz
Input Impedance 100KΩ unbalanced, 600 Ω balanced
THD + Noise <0.03% typical
Noise Floor -78 dB
Indicators Power LED
Input/Output jacks XLR balanced input
RCA unbalanced input and output
Size: 4" x 4" x 1.5"
Weight: 1 lb. (.5 kg)
Power: 12 - 16 VDC 50mA
5 x 1.2 mm DC Jack - Center Negative
DU30B SCHEMATIC
WE RECOMEND TURNING THE DUCK SENSITIVITY AND
DUCK DEPTH KNOBS BOTH FULLY CLOCKWISE (ALL
THE WAY UP) TO START. THIS IS THE HIGHEST SENSITIVITY AND MOST DUCKING AVAILABLE ON THE UNIT.
OPERATION
If you are using a condenser microphone, carefully connect the two
Phantom Power jumper pins together. Set the level of the music
signal (Line In) for a comfortable level. Speak into the microphone
and adjust the Mic Level for a comfortable level, then adjust the
Sensitivity so that the music is muted when speaking with a normal
voice. Set the Release Time control for the amount of time you wish
for the Aux In signal to return to normal. Set the Duck Depth control
for the amount of Aux In signal reduction you want when the Mic or
Alternate signal is present.
WARRANTY
For information on the Rolls One Year Limited Warranty, and
to register this product, visit our website at www.rolls.com
Rolls Corporation
Salt Lake City, UT
9/05
Loading...