Rolls RM68 User Manual
This product is warranted to the original consumer purchaser to be free
purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited
to repair or replacement (at our option), during the warranty period of any part
which proves defective in material or workmanship under normal installation,
use and service, provided the product is returned to Rolls Corporation, TRANS-
the date of manufacture.
This warranty shall be invalid if the product is damaged as a result of
rial number, improper electrical voltages or currents, repair, alteration or mainte-
nance by any person or party other than our own service facility or an authorized
This one-year warranty is in lieu of all expressed warranties, obligations
you.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCI-
ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER.
which vary from state to state.
Thank your for your purchase of the Rolls RM68 ZONE WOLF 2-Zone Mixer. The
talkover function, activated automatically when signal is present at Mic One and
the Talkover switch is engaged. +12 VDC phantom power is available for each in-
for each zone output.
Applications for the Zone Wolf include restaurants, hotels, schools, churches or
factories.
VOLUME 1 - 3: Adjusts the level of signal from either Source Inputs 1 - 3 or Mic
VOLUME 4 - 6: Adjusts the level of signal from Sources 4 - 6 to the selected
VOLUME: Adjusts the output level of the zone from -infinity (off) to a maximum of
TREBLE: Controls the amount of the high-frequency content of the zone signal.
vertically, not connecting the phantom power. To connect phantom power to the
two adjacent pins by installing the jumper horizontally.
volume controls with Mic inputs 1 - 3. Channels 4 - 6 are independent.
TALKOVER SWITCH: Engages the talkover function for Mic Input 1. When
Source: 22K Ohm RCA unbalanced
Bus In: 22K Ohm unbalanced
Source: +24 dBV
Line: 26 dB
Tone Control: 12 dB boost/cut
THD: <.003%
(48.3 x 4.5 x 15 cm)
Weight: 5 lbs. (2.3 kg)
Loading...