Rolls RM65 User Manual
LINETRIM
ROLLS RM65 6 x 4 MIXER
+17+80-4-13
LEFT RIGHT
MASTER VOLUME
RETURN
EFFECTS
FX
SEND
R
PANTREBLE
L
+
+
BASS
010 010-
MONITOR
VOLUM E
CLIP
FX
SEND
R
PANTREBLE
L
+
+
BASS
010 010-
MONITOR
VOLUM E
CLIP
FX
SEND
R
PANTREBLE
L
+
+
BASS
010 010-
MONITOR
VOLUME
CLIP
FX
SEND
PANTREBLE
BASS
MONITOR
VOLUME
CLIP
FX
SEND
PANTREBLE
BASS
MONITOR
VOLUM E
CLIP
FX
SEND
PANTREBLE
BASS
MONITOR
VOLUME
CLIP
Audio Mixer
Professional
PWR
RM65
R
L
+
+
010 010-
R
L
+
+
010 010-
R
L
+
+
010 0 10-
CHANNEL 1
MIC
LINE
TRIM
CHANNEL 2
MIC
LINE
TRIM
CHANNEL 3
MIC
LINE
TRIM
CHANNEL 4
MIC
LINE
TRIM
CHANNEL 5
MIC
LINE
TRIM
CHANNEL 6
MIC
PHANTOM
AUX
BUSS IN
FX
SEND
FX
RETURN
OUT
MONITOR
OUT
RIGHT
SERIAL NUMBER
65-
OUT
LEFT
MODEL RM65
C US
The new ROLLS RM65 6 x 4 mixer is a breakthrough in size/performance for
an audio mixer, it is a full function 6 channel mixer in a single space 19" rack
chassis. It is intended for sound reinforcement, studio, choir, and other
applications where high channel to size ratio is desirable. The RM65 is in-
RISQUE DE CHOC - NE PAS ENLEVER
tended for professional applications and has socketed IC's, double sided
circuit board and painted steel chassis. It has 6 XLR microphone and 6 1/4"
line inputs. The mic inputs have individual 36V phantom power switches and
input gain trims located on the rear panel.
FEATURES
Full function 6 channel console mixer in 1 rack space
6 XLR mike inputs and 6 1/4" line input jack
36 Volt Phantom Power
Individual phantom power switches for each XLR
Input gain trim control for each mic input
Clip indicators for each channel
Monitor, effects send and Pan pots on each channel
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT NOT REMOVE BACK.
Treble and Bass tone controls for each channel
R & L Master volumes and FX Return master channel
CAUTION:
NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Standard 19" x 1.75 EIA rack chassis
SPECIFICATIONS
Input Impedance: 600 9 balanced
Output Impedance: 50 W TRS Balanced
Max Input Level: -15 dBV XLR 600 W
DO NOT EXPOSE THIS EQUIPMENT TO RAIN
:
Phase Shift: < 10 deg. 20 Hz - 20 kHz
WARNING
OR MOISTURE.
Input Connectors: XLR and 1/4"
POWER
Phantom Power: 36 Volts DC
Outputs: 1/4" main balanced +17 dB max
Max Gain: (Mains) 60 dB mic
Tone controls: 20 dB treb, bass cut/boost, 400 Hz center
Max S/N Ratio: 106 dB
THD < .003%
IMD (SMPTE) < .003%
MADE IN U.S.A.
CMRR 52 dB
Power 120 VAC 50-60 Hz, 15 W
Weight: 7 lbs (3KG)
Size: 19" x 1.75" x 6.5" (48cm x 4.5cm x 17cm)
120 VAC
50/60 Hz 15 VA
50K 9 unbalanced (1/4")
+18 dBV 1/4"
1/4" monitor +17 dB max
1/4" FX send
26 dB line
(Monitor) 55 dB
ROLLS Coporation 8/97
5143 South Main Street, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
rollsrfx@rolls.com • www.rolls.com
Loading...