Rolls RDB109 User Manual
RDB109
SOUND CENTER
Audio Distribution
RDB109
ROLLS CORPORATION
SALT LAKE CITY, UTAH
08/08
QUICK START GUIDE
INTRODUCTION
Thank you for your purchase of the ROLLS RDB109 SOUND CENTER.
The RDB109 is an audio distribution device with a single balanced XLR
line-level input, distributed via transformer isolation to ten balanced XLR
outputs.
NOTE: This manual assumes the user has a basic working
knowledge of the proper connection and operation of professional audio equipment.
DESCRIPTION
OPERATION
Connect the input source to the INPUT of the RDB109. This may be a
line level or consumer level signal. We do not recommend connecting a
microphone directly into the RDB109 INPUT. Connect the RDB109 OUTPUTs to the inputs of the recording, broadcasting, etc. devices.
WARRANTY INFO
Please visit our web site; www.rolls.com, for complete information on the
Rolls Warranty, and to register and initiate this product’s warranty.
FRONT PANEL
Output Jacks 1 - 10: Balanced XLR jacks.
REAR PANEL
INPUT LOOP THRU
INPUT: Balanced female XLR jack.
LOOP THRU: Balanced male XLR jack hard-wired to the INPUT jack.
XLR
Female
Input
2
XLR
Male - Loop Thru
3
1
60 Ohm - 600 Ohm
2
3
1
To 9 more transformers
and XLR Outputs
XLR Male
2
3
Output x 10
1
RDB109
SPECIFICATIONS
Connectors: 1 XLR Female Input Jack
1 XLR Male Loop Through Jack
10 XLR Male Output Jacks
Frequency Response: 30 - 20kHz +0 /- 3 dB
Output Impedance: 600 W each
Input Impedance: 60 W
Size (W x H x D): 19” x 1.75” x 2.5” (480 x 45 x 64 mm)
Weight: 4 lbs.
XLR
Female
Input
2
XLR
Male - Loop Thru
3
3
1
60 Ohm - 600 Ohm
2
1
To 9 more transformers
and XLR outputs
3
XLR Male
2
Output x 10
1
Loading...