Rolls Phantom HexRPB486 Specifications

ROLLS

Phantom

Power Supply

RPB486

Phantom Hex

PWR

RPB486

120 VAC

MADE IN U.S.A

ROLLS

50/60 Hz 15 VA

WARNING: To reduce the risk of electric shock or fire, do not expose

this device to rain or moisture. CAUTION: To reduce the risk of electric
shock do not remove lid. No user serviceable parts inside.
Refer servicing to qualified service personnel.

SERIAL NUMBER

486-

MODEL RPB486

INPUTOUTPUT

CHANNEL SIX

CHANNEL FIVE

RPB623 PHANTOM HEX
Six Channel Phantom Power Supply
The RPB623 is an ultra clean six channel 48 volt phantom power
supply. The unit powers up to six condenser microphones for use in

Phantom

digital multitrack recording situations, or contractor applications
where several mics must be powered from a single source.
SPECIFICATIONS
Connectors: 6 ea. XLR female jacks (pin 2 hot)

Power Supply

6 ea. 1/4. TRS jacks (tip positive)
Phantom Power Voltage: 48 Volts
Max Phantom Power Current: 14 mA each channel

INPUTOUTPUT

INPUTOUTPUT

CHANNEL FOUR

INPUTOUTPUT

CHANNEL THREE

INPUTOUTPUT

CHANNEL TWO

INPUTOUTPUT

CHANNEL ONE

XLR INPUTS

1/4” OUTPUTS

TRUE 48 VOLT PHANTOM POWER

ROLLS

5968 SOUTH 350 WEST S.L.C.,UT 84107

PHONE: [phone]

FAX: [phone]

DATA SHEET FOR RPB486 www.rolls.com

Power Supply: Linear 120VAC 50/60Hz
Size (W x H x D): 19" x 1.75" x 2.5" (48 x 4.5 x 12.7)
Weight: 4 lbs.
FEATURES:
. 6 XLR Mic inputs and 1/4" TRS balanced outputs
. 48 Volts of regulated phantom power for each input
. Front panel LED indication for channel "in-use"
. Clean, quite internal power supply
. Pull-down resistors and isolation capacitors on all outputs to
minimize the possibilit y of equipment damage downline

MADE IN USA