Rolls MX124 Users Manual

OWNERS MANUAL

ROLLS CORPORATION

SALT LAKE CITY, UTAH

LIMITED WARRANTY

This product is warranted to the original consumer purchaser to be free from

defects in materials and workmanship under normal installation, use and service for a

period of one (1) year from the date of purchase as shown on the purchaser’s receipt.

The obligation of Rolls Corporation under this warranty shall be limited to

repair or replacement (at our option), during the warranty period of any part which proves

defective in material or workmanship under normal installation, use and service, provided

the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PRE-

PAID. Products returned to us or to an authorized Service Center must be accompanied

by a copy of the purchase receipt. In the absence of such purchase receipt, the warranty

period shall be one (1) year from the date of manufacture.

This warranty shall be invalid if the product is damaged as a result of deface-

ment, misuse, abuse, neglect, accident, destruction or alteration of the serial number,

improper electrical voltages or currents, repair, alteration or maintenance by any person

or party other than our own service facility or an authorized Service Center, or any use

violative of instructions furnished by us.

This one-year warranty is in lieu of all expressed warranties, obligations or li-

abilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, IN-

CLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WAR-

RANTY. Some states do not allow limitations on how long an implied warranty lasts, so

the above limitation may not apply to you.

IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR-

RANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the

exclusion or limitation of special, incidental or consequential damages so the above limi-

tation or exclusion may not apply to you. This warranty gives you specifi c legal rights,

and you may also have other rights which vary from state to state.

SPECIFICATIONS

THD + Noise: .02%

DC Power Jack (5.5 X 2.1 mm tip negative)

Weight: 1.5 lbs.

As shown here, under each number is a P indicating Phantom Power, and an L which

the phantom power is OFF. When the L switch is UP, the low-cut is ON, when it is DOWN,

the low-cut is OFF.

Phantom
Low Cut
Phantom
Low Cut
Phantom
Low Cut
Phantom
Low Cut

Phan Pwr ON=dwn
Low Cut ON=up

Thank you for your purchase of the MX124 ProMix IV. This unit is designed and manufac-

tured to mix four microphones together and send their combined signals out stereo trans-

former-balanced XLR outputs, or front panel 1/4” and 1/8” stereo outputs. The individually

switchable phantom power and low-cut switches provide the final touches which make the

tion.

Your MX124 was carefully packed at the factory in a protective carton. Nonetheless, be

sure to examine the unit and the carton for any signs of damage that may have occurred

during shipping. If obvious physical damage is noticed, contact the carrier immediately to

safely transporting the unit in the future.

2. Please visit our website at

www.rolls.com

text and follow the instructions to register your MX124. Or complete the Warranty Regis-

tration Card and return it to the factory.

device in the signal chain such as a signal processor or amplifier.

output. Turning these controls

clockwise

increases the output level. These controls do not

amplifier, or camera.

positive) external power supply.