Rolls MS20C User manual

be connected to an unbalanced signal source (Tip-Sleeve) such as a mixer output or

Ring of the 1/8" jack MUST be connected to

the Sleeve, and the

bottom XLR Output jack will have it's pin 3 grounded.

to the top XLR Input, the 1/8" jack may be connected via a Tip-Sleeve jack to an

unbalanced input.

Thank you for your purchase of the MS20c Splitter, Combiner, and bal-

This versatile unit will split a single balanced XLR signal into two isolated

TRS signal together into a single output, or simply isolate a balanced line

for buzz or hum elimination.

Your MS20c was carefully packed at the factory in a protective carton.

www.rolls.com

to the microphone or other signals to be split/combined.

A STEREO INPUT, IT

the ground pins have been separated.

Weight: 10 Ounces

NOTE: PHANTOM

the signal to be isolated to the INPUT, and the mixer or next de-

vice to the OUTPUT.