Rolls HM59 User Manual

LIMITED WARRANTY
This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTA TION CHARGES PRE­PAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture.
This warranty shall be invalid if the product is damaged as a result of deface­ment, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us.
This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MER­CHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL
HM59
Headphone Monitor Remote
EXPANSIONEXPANSION
HEADPHONE MONITOR REMOTE
EFFECTS
RETURN
PWR
MIX LEVELS
1
MIX OUTPUT
PHONE/
LEFT
234
MASTER
LEVEL
AGC
COMP
RIGHT
MAIN
+12
-12
0
64 125
EQUALIZER
500
250
1K 2K 4K 8K 16K
HM59
OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
ROLLS CORPORATION
SAL T LAKE CITY, UT AH
3/00
NOTE: THIS UNIT REQUIRES A ROLLS HM60 OR
HM57 FOR OPERATION.
OWNERS MANUAL
INTRODUCTION
Thank you for y our purchase of the Rolls HM59 Headphone Monitor Remote. This unit, along with either the HM60 Headphone Monitor System or HM57 Head­phone Monitor Interface, allows y ou to mix f our mono signals with tw o stereo signals for your own personal monitoring needs. It includes equalization and AGC compression. Please read the following manual carefully to get the best results from y our HM59.
TABLE OF CONTENTS
Introduction 1 Table of Contents 1 Inspection 1 Specifications 1 Description
Top Panel 2
Front P anel 2
Bottom Panel 2 Connection 3 Operation 4 Block Diagram 5 Schematic 6 Warranty Rear Cover
INSPECTION
1. Unpac k and inspect the HM59 bo x and pac kage . If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future.
2. Please complete the Warranty Registration Card and return it to the factory.
SPECIFICATIONS
Output Impedance: 10 Sensitivity: V ariable , -10 to +4 dB f or rated output Po wer Output: >500 mW at 32
(>150 mW at 600 ohms) 20 Hz to 20 KHz.
Connectors: Outputs: 1/4" TRS stereo headphone jac k,
DB25 jack
Distortion: 0.008% THD full po wer @ 1 KHz;
0.05% THD 20Hz to 20 KHz Dynamic Range: Greater than 96 dB Freq. Response: 20 Hz to 20 KHz, +0, -1 dB 400 mW output Power Requirement
: Receives power from HM60 or HM57 Dimensions: 6.25”H x 9.125”W x 1.375”D Weight: 2.5lbs.
R 4 5
N E 5 7 0
C 6 4
1 2 0 P F
P 1 0 B
P 6
P 1 0 0 K
2 2 K
R 4 6
2 2 K
R 4 7
6
5
7
R3
INV
OUT
U 1 9 A
THD8DG3RIN2RC1GND
2
8
VCC
4 5 6 0
R 5 6
Q 1
VCC
M P S A 0 6
SCHEMATIC
15-Oct-1999
A
of
5143 South Main Street
ROLLS CORPORATION
Salt Lake City, UT 84107
VDD
C 9 4
. 1
C 8 8
. 1
VCC
C 8 0
. 1
VCC
C 7 8
. 1
VCC
C 7 4
. 1
VCC
C 7 0
. 1
Rev:
Sheet 1
D o c u m e n t N u m b e r
H M 5 9 . S C H
R O L L S M R H E A D P H O N E S S L A V E II
Rb
Date:
Title
Size:
C 9 5
. 1
C 8 7
. 1
VDD
C 8 1
. 1
VDD
C 7 9
. 1
VDD
C 7 3
. 1
VDD
C 6 9
. 1
VDD
1
VDD
14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13
VCC
J 1 6
D B 2 5 M A L E
VDD
1
R M A I N
P 1 0 A
P 1 0 0 K X 2
1 3
P 1 1 A
L M A I N
4 6
5
P 1 0 0 K X 2
R 4 1 2 2 K
P 7
P 1 0 0 K
2 2 K
R 4 8 2 2 K
C 2
1 0 U
0
C 1
V+
C 5
4
C 1 5
1 U
P 1 2 A
P 1 0 0 K X 2
1 3
C 4 6
2 7 P F
6
5
U 6 B
7
3 0
Q 2
2 N 2 9 0 7
VDD
R 1 2 3
1 0
J 1 1
H D P H N / L O U T
P 1 0 0 K X 2
1 3
R 4 4
2 2 K
2
2
R R E T L R E T
4 6
R 4 2 2 2 K
R 4 3
2 2 K
P 1 1 B
5
P 1 0 0 K X 2
P 8
P 1 0 0 K
P 9
P 1 0 0 K
R 4 9 2 2 K
R 5 0 2 2 K
R 5 1 2 2 K
R 5 2 2 2 K
1 0 U
1 0 0 K
R 5 8 3 3 K
123
1 0 U
1 0 U
S W 2 A
VCC
R 7 6
P 1 0 0 K X 2
46
3
4 5 6 0
Q 3
M P S A 0 6
P H O N E 1 / 4
1 0 K
C 4 5
U 6 A
1
R 6 1
R 5 7 3 3 K
D P D T
N E 5 7 0
C 6 5
1 2 0 P F
P 1 2 B
5
2 7 P F
2
R 6 0
1 0
10
11
12
R3
INV
OUT
U 1 9 B
THD9DG14RIN15RC16GND
4
VDD
3 0
Q 4
2 N 2 9 0 7
VDD
R I G H T O U T
VCC
13
V+
0
1 U
J 1 0
14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13
VCC
C 8
1 0 U
R 5 9
1 0 0 K
C 1 0
1 0 U
C 7
456
1 0 U
C 1 3
1 0 U
S W 2 B
C 1 6
R 7 7
1 0 K
P H O N E 1 / 4
1
U 1 2 A
4 5 6 0
2
C 6 1
R 9 2
1 K
J 1 6
D B 2 5 F E M A L E
13
P 1 3 A
R 8 7
C 3 6
2 7 P F
1
D P D T
U 7 A
4 5 6 0
2
3
C 6 0
R 6 7
1 K
46
5
H 2 E
5
P 1 3 B
R 6 2
1 8 K
C 3 4
2 7 P F
1
4
U 1 3 A
VDD
4 5 6 0
R 9 3
1 0 0 K
3
2
3
C 3 3
. 0 3 9
R 9 6
1 K
7
4 5 6 0
8
U 1 2 B
VCC
6
5
R 9 1
1 0 0 K
C 4 9
. 0 1 8
R 9 0
1 K
C 6
1 U F
C 6 7
C 1 9
1 . 5 U F
13
13
H 1 E
H 1 F
P 1 4 A
P 1 5 A
4 4
2
2
6 6
5 5
1
R 8 8
1 0 K
1 8 K
4
U 1 6 A
4 5 6 0
2
3
1
4
U 8 A
VDD
4 5 6 0
R 6 8
1 0 0 K
2
3
C 3 2
. 0 3 9
R 7 1
1 K
7
4 5 6 0
8
U 7 B
VCC
6
5
R 6 61 0 0 K
C 4 8
. 0 1 8
R 6 5
1 K
C 6 6
C 1 8
46
3
1 . 5 U F
1 U F
46
4
C 4
H 2 C
5
H 2 D
3
H 6 D
H 6 E
5
5
4
P 1 4 B
P 1 5 B
1
1
R 8 6
1 0 K
H 3 A
1
4
U 1 1 A
VDD
4 5 6 0
2
3
1
4 5 6 0
4
U 1 4 A
VDD
R 9 7
1 0 0 K
2
3
C 5 9
. 0 0 8 2
R 1 0 0
1 K
7
4 5 6 0
8
U 1 3 B
VCC
6
5
R 9 5
1 0 0 K
C 5 1
. 0 0 3 9
R 9 4
1 K
. 4 7
C 2 1
. 2 7
C 2 3
13
13
H 1 D
H 1 C
P 1 6 A
P 1 7 A
3 3
2
H 8 B
VDD
R 7 2
. 0 0 8 2
VCC
. 4 7
H 6 C
2 2
2
2
2
H 4 B
8
VCC
C 3 7
2 7 P F
R 8 9 1 0 K
1
4 5 6 0
4
U 9 A
VDD
1 0 0 K
2
3
C 5 8
R 7 5
1 K
7
4 5 6 0
8
U 8 B
6
5
R 7 0
1 0 0 K
C 5 0
. 0 0 3 9
R 6 9
1 K
C 2 0
. 2 7
C 2 2
46
46
1
2
H 2 A
H 2 B
H 6 B
5
5
1
2
P 1 6 B
P 1 7 B
H 7 A
H 3 B
8
VCC
C 3 5
2 7 P F
R 6 3 1 0 K
1
4 5 6 0
4
VDD
R 1 0 1
1 0 0 K
. 0 0 2 2
4 5 6 0
8
VCC
R 9 8
1 K
. 1 2
H 1 B
2
P 1 8 A
1
H 8 A
H 4 A
1
6
5
U 1 6 B
4 5 6 0
7
4
VDD
R 8 0
1 0 0 K
. 0 0 2 2
4 5 6 0
8
VCC
6
R 7 3
1 K
. 1 2
46
H 6 A
P 1 8 B
2
H 7 B
2 6
5
U 1 1 B
4 5 6 0
7
4
U 1 5 A
VDD
R 1 0 5
1 0 0 K
2
3
C 5 7
4 7 0 P F
R 1 0 4
1 K
7
U 1 4 B
6
5
C 5 3
C 2 5
13
1 1
4 5 6 0
R 8 3
7
U 9 B
5
C 5 2
C 2 4
6
H 4 F
5
6
7
VCC
4 5 6 0
8
U 1 5 B
6
5
R 1 0 3
R 9 9
1 0 0 K
8 2 0 P F
. 0 6 8
C 2 7
3
13
H 1 A
P 1 9 A
H 7 C
3
2
1
U 1 0 A
2
3
C 5 6
1 K
R 7 4
1 0 0 K
8 2 0 P F
. 0 6 8
C 2 6
46
5
H 4 E
H 8 F
5
P 1 9 B
1 0 0 K
C 5 5
2 7 0 P F
R 1 0 2
1 K
C 3 1
. 0 3 3
13
H 3 C
2
P 2 0 A
4
VDD
R 8 4
1 0 0 K
4 7 0 P F
7
VCC
4 5 6 0
8
U 1 0 B
6
5
C 5 4
R 8 1
1 K
. 0 3 3
C 2 8
46
4
H 4 D
H 8 E
5
4
P 2 0 B
. 0 0 8 2
C 2 9
. 0 1 5
4
R 6 4
1 K
13
H 3 D
P 2 1 A
4
2
2
55
VCC
R 8 2
1 0 0 K
2 7 0 P F
. 0 1 5
46
H 8 D
5
VCC
C 3 0
. 0 0 8 2
R 8 5
1 K
H 8 C
5
3
3
H 4 C
P 2 1 B
1 6
BLOCK DIAGRAM
FX
RETURN
+V
DB25
MULTI-PIN
CONNECTOR
-V
MAIN LEVEL
MONO AUX LEVELS
EQUALIZER
EQUALIZER
COMPRESSOR
COMRPESSOR
COMPRESSOR
IN/OUT
MASTER OUTPUT
LEVEL
Headphone
Output
DESCRIPTION
TOP PANEL
EXPANSION PORTS: Male and Female DB25 par allel port jacks. The output Expansion jack is female and is located on the right side of the top panel. The input Expansion jack is male and is on the left side of the top panel.
FRONT PANEL
NOTE: All input signals described below are connected to either the HM60 or HM57. Ref er to that unit’s owners manual for proper input connection.
EFFECTS RETURN: Adjusts the le v el of stereo signal returning from a signal processor connected to an HM60. MIX LEVELS;1 - 4 and Main: Adjust the le vel of input signal from the correspond­ing input. MASTER LEVEL: Adjusts the amount of mix ed signal being sent to the Mix Output jacks. EQUALIZER: These slider controls adjust the level of the indicated frequency. For example, the 64 slider boosts or cuts the 64 Hertz component of the output signal by + or - 12 dB. The lo w er frequencies; 64 to 250 correspond to bass frequencies, the 500 to 2K sliders correspond to mid frequencies, and the 4K to 8K sliders adjust the high or treble frequencies. PWR: Indicates that the HM60 is connected to a pow er source and is on.
BOTT OM PANEL
MIX OUTPUT: Phone/Left: F or connection to a set of stereo headphones. If a mono Tip-Sleeve plug is connected, this jack becomes the Left Output. Right: Contains the Right portion of the Output signal. Do not use this jac k if y ou’re connecting stereo headphones to the Phone/Left jack. AGC COMP: This switch engages the A utomatic Gain Control compressor .
EXPANSIONEXPANSION
HEADPHONE MONITOR REMOTE
EFFECTS
RETURN
PWR
MIX LEVELS
234
1
MASTER
MIX OUTPUT
PHONE/
5 2
LEFT
RIGHT
AGC
COMP
LEVEL
MAIN
EQUALIZER
+12
0
-12
64 125
500
250
HM59
1K 2K 4K 8K 16K
CONNECTION
OPERATION
CONNECTING THE HM59 Shown below is a connection diagram f or the HM59. The male jack on the left is the Input, and the female jack on the right is the Output. Connect from the female OUTPUT expansion jack of either the HM60 or HM57 via the DB25 cable to the male INPUT Expansion jack on the HM59. The female OUTPUT Expansion jack on the HM59 may then be connected to another HM59 or HM58.
From HM60
or HM57
234
1
MIX OUTPUT
PHONE/
RIGHT
LEFT
MIX LEVELS
AGC
COMP
HEADPHONE MONITOR REMOTE
MASTER
LEVEL
MAIN
+12
-12
0
EFFECTS RETURN
64 125
EQUALIZER
250 500
1K 2K 4K 8K 16K
EXPANSIONEXPANSION
HM59
HM58 or HM59
PWR
To other
REMOTE
UNITS
OPERA TING THE HM59 After proper connections are made, begin sending signals to the HM60 or HM57, whichever is connected to the signal sources and y our HM59.
Set the HM59 Master Level control at approximately 12 Oclock. Carefully bring up the 1-4 and Main Mix Levels until a desired mix is achieved.
Adjust the Equalizer as needed. The 64, 125, and 250 Hz sliders control the lower or bass frequencies, the 500, 1K, and 2K sliders adjust the middle frequen­cies, the 4K, 8K, and 16K sliders vary the high or treble frequencies.
The A GC compressor keeps transient signals like pops or feedback under control, so they wont damage your hearing. It also slightly brings up low-level signals.
NOTE: Much of the signal content may not be compressed, you ma y not
notice any effect. Only very high level or lo w le vel signals are effected.
If using external effects processors, make sure the y are properly connected to the HM60, and the levels are set properly. Refer to the HM60 owners man ual, as well as the operating manual of the effects processor.
If you hav e an eff ects processor connected to the HM60 control unit, the HM59 Effects Return adjusts the level of the eff ected signals to y our headphone mix. Note that the Effects Sends 1 - 4 and MAIN on the HM60 determine the mix of signals sent to the effects processor . The HM59 FX Return control will only adjust the level of that mix. In other words, the signals present at the Right and Left Effects Return jacks on the HM60 will be the signals adjusted by the FX Return control on the HM59.
1
2
MONO INPUTS
4
3
EFFECTS SENDS
MIX LEVELS
FX
SEND
RIGHT
STEREO
INPUTS
LEFT
R
EFFECTS
RETURN
EFFECTS
RETURN
L
EXPANSION
PWR
HEADPHONE
120 VAC
50/60Hz
MONITOR SYSTEM
1
PHONE/
3 4
LEFT
234
MIX OUTPUT
AGC
COMP
RIGHT
MASTER
LEVEL
MAIN
EQUALIZER
+12
0
-12
500
250
64 125
1K 2K 4K 8K 16K
Loading...